PiMP Troubleshooter


You can troubleshoot your mining rig using this information.



Calling all PiMPs! Farmer 3523 Needs Assistance!
URL: https://miner.farm/farmer/3523/

PiMP Rescue at: 2018-03-10 18:48

PiMP Mining Status

Hardware Summary

View your rig hardware at a glance.

Motherboard: Product Name: H110 Pro BTC+
2-Core CPU:
model name : Intel(R) Celeron(R) CPU G3930 @ 2.90GHz
model name : Intel(R) Celeron(R) CPU G3930 @ 2.90GHz
RAM:
MemTotal: 3727592 kB
MemFree: 1366316 kB
MemAvailable: 1523856 kB
Primary Boot Disk: Device Model: TOSHIBA MK1255GSX H

AMD GPUs:

NVIDIA GPUs:
GPU 0: GeForce GTX 1070 Ti (UUID: GPU-1b5b34bd-b127-ca7c-ebaf-e0c6f04ea8b3)
GPU 1: GeForce GTX 1070 (UUID: GPU-3ca51ab8-4a20-76f4-faa2-1aae0d99c1e7)
GPU 2: GeForce GTX 1080 (UUID: GPU-7701f6ef-7bd5-51af-d880-e0075f80ef9e)
GPU 3: GeForce GTX 1070 (UUID: GPU-0281872b-1a6b-11be-0e73-10e363bc8083)
GPU 4: GeForce GTX 1070 Ti (UUID: GPU-7da040d8-6197-f1e2-5198-8fbce4191b9c)
GPU 5: GeForce GTX 1070 Ti (UUID: GPU-96b2a419-9e8c-5f6c-93bf-c53ad0868e03)
GPU 6: GeForce GTX 1070 Ti (UUID: GPU-1a2d5c6c-9dd4-38d2-cce8-e465695ba87e)
GPU 7: GeForce GTX 1080 (UUID: GPU-071fb30f-83a3-d08d-7f79-08ba3e27856c)
GPU 8: GeForce GTX 1070 Ti (UUID: GPU-1d1e2c2c-43a3-f9a5-d5ec-739ee89e5168)
GPU 9: GeForce GTX 1070 (UUID: GPU-0e812c77-37b5-aa5f-8579-5b2fa6407352)
GPU 10: GeForce GTX 1070 Ti (UUID: GPU-85520718-a990-637b-a5e3-ba89c80b7a1f)

Software Summary

View your rig software at a glance.

PiMP Image v 2.5-all rc30
PIMP Software v20180220

pimp --list

This shows the current mining profiles loaded in minerfarm with pimp --add, and their status. Note the ID numbers. These are used with commands like pimp --add and pimp --test.

Miners:
ID 1 localhost:4028 ewbfminer ewbf.zcash.pcfg (Running)

pimp --status

This shows the current PiMP Rig Mining status similar to the header in the minerfarm Agent Console.

Agent name: RIG4 - IP: 192.168.1.8
Agent service is: Running
Last update: Success
Last message: All good!
Total farm hashrate: 0Mh/s

PiMP Configuration

ll /opt/confs

Which confs were modified? The default confs are thoroughly tested by PIMP Testing and Support. We recommend you start with these, verify mining is working, then customize with your own settings and wallets.

total 20
drwxr-xr-x 3 root root 4096 Mar 9 13:18 .
drwxr-xr-x 11 root root 4096 Jan 6 09:11 ..
lrwxrwxrwx 1 root root 31 Sep 6 2017 bfg.gsd.conf -> /opt/confs/default/bfg.gsd.conf
lrwxrwxrwx 1 root root 32 Sep 6 2017 bfg.zeus.conf -> /opt/confs/default/bfg.zeus.conf
lrwxrwxrwx 1 root root 39 Feb 4 02:57 bminer.equihash.pcfg -> /opt/confs/default/bminer.equihash.pcfg
lrwxrwxrwx 1 root root 36 Mar 9 13:12 ccminer.aeon.pcfg -> /opt/confs/default/ccminer.aeon.pcfg
lrwxrwxrwx 1 root root 36 Mar 9 13:12 ccminer.dash.pcfg -> /opt/confs/default/ccminer.dash.pcfg
lrwxrwxrwx 1 root root 36 Mar 9 13:12 ccminer.lbry.pcfg -> /opt/confs/default/ccminer.lbry.pcfg
lrwxrwxrwx 1 root root 39 Mar 9 13:12 ccminer.lyra2v2.pcfg -> /opt/confs/default/ccminer.lyra2v2.pcfg
lrwxrwxrwx 1 root root 35 Mar 9 13:12 ccminer.neo.pcfg -> /opt/confs/default/ccminer.neo.pcfg
lrwxrwxrwx 1 root root 37 Mar 9 13:12 ccminer.nist5.pcfg -> /opt/confs/default/ccminer.nist5.pcfg
lrwxrwxrwx 1 root root 35 Mar 9 13:12 ccminer.phi.pcfg -> /opt/confs/default/ccminer.phi.pcfg
lrwxrwxrwx 1 root root 37 Mar 9 13:12 ccminer.skein.pcfg -> /opt/confs/default/ccminer.skein.pcfg
lrwxrwxrwx 1 root root 37 Mar 9 13:12 ccminer.skunk.pcfg -> /opt/confs/default/ccminer.skunk.pcfg
lrwxrwxrwx 1 root root 35 Feb 4 02:57 ccminer.xmr.pcfg -> /opt/confs/default/ccminer.xmr.pcfg
lrwxrwxrwx 1 root root 35 Sep 6 2017 cgminer.gsd.conf -> /opt/confs/default/cgminer.gsd.conf
lrwxrwxrwx 1 root root 36 Sep 6 2017 cgminer.zeus.conf -> /opt/confs/default/cgminer.zeus.conf
lrwxrwxrwx 1 root root 37 Nov 29 17:29 claymore.dual.pcfg -> /opt/confs/default/claymore.dual.pcfg
lrwxrwxrwx 1 root root 40 Nov 11 14:31 claymore.xmr.amd.pcfg -> /opt/confs/default/claymore.xmr.amd.pcfg
lrwxrwxrwx 1 root root 38 Sep 6 2017 claymore.zcash.pcfg -> /opt/confs/default/claymore.zcash.pcfg
lrwxrwxrwx 1 root root 43 Oct 4 18:09 cpuminer-multi.aeon.pcfg -> /opt/confs/default/cpuminer-multi.aeon.pcfg
lrwxrwxrwx 1 root root 42 Sep 6 2017 cpuminer-multi.xmr.pcfg -> /opt/confs/default/cpuminer-multi.xmr.pcfg
drwxr-xr-x 2 root root 4096 Mar 9 13:12 default
lrwxrwxrwx 1 root root 37 Mar 9 13:12 dstm.equihash.pcfg -> /opt/confs/default/dstm.equihash.pcfg
lrwxrwxrwx 1 root root 36 Mar 9 13:12 ethminer.amd.pcfg -> /opt/confs/default/ethminer.amd.pcfg
lrwxrwxrwx 1 root root 39 Mar 9 13:12 ethminer.nvidia.pcfg -> /opt/confs/default/ethminer.nvidia.pcfg
-rw-r--r-- 1 root root 7670 Mar 9 13:19 ewbf.zcash.pcfg
lrwxrwxrwx 1 root root 39 Sep 6 2017 nheqminer.zcash.pcfg -> /opt/confs/default/nheqminer.zcash.pcfg
lrwxrwxrwx 1 root root 36 Feb 4 02:57 nsgminer.neo.conf -> /opt/confs/default/nsgminer.neo.conf
lrwxrwxrwx 1 root root 46 Feb 4 02:57 nvidia.ccminer.lyra2v2.pcfg -> /opt/confs/default/nvidia.ccminer.lyra2v2.pcfg
lrwxrwxrwx 1 root root 42 Dec 11 00:49 optiminer.equihash.pcfg -> /opt/confs/default/optiminer.equihash.pcfg
lrwxrwxrwx 1 root root 28 Sep 6 2017 README.md -> /opt/confs/default/README.md
lrwxrwxrwx 1 root root 36 Sep 6 2017 sgminer.dash.conf -> /opt/confs/default/sgminer.dash.conf
lrwxrwxrwx 1 root root 35 Sep 6 2017 sgminer.eth.conf -> /opt/confs/default/sgminer.eth.conf
lrwxrwxrwx 1 root root 39 Sep 6 2017 sgminer.groestl.conf -> /opt/confs/default/sgminer.groestl.conf
lrwxrwxrwx 1 root root 36 Sep 6 2017 sgminer.lbry.conf -> /opt/confs/default/sgminer.lbry.conf
lrwxrwxrwx 1 root root 39 Mar 9 13:12 sgminer.lyra2v2.conf -> /opt/confs/default/sgminer.lyra2v2.conf
lrwxrwxrwx 1 root root 37 Sep 6 2017 sgminer.multi.conf -> /opt/confs/default/sgminer.multi.conf
lrwxrwxrwx 1 root root 38 Sep 6 2017 sgminer.pascal.conf -> /opt/confs/default/sgminer.pascal.conf
lrwxrwxrwx 1 root root 36 Sep 6 2017 sgminer.sigt.conf -> /opt/confs/default/sgminer.sigt.conf
lrwxrwxrwx 1 root root 38 Sep 6 2017 sgminer.x11evo.conf -> /opt/confs/default/sgminer.x11evo.conf
lrwxrwxrwx 1 root root 35 Oct 20 18:22 sgminer.xmr.conf -> /opt/confs/default/sgminer.xmr.conf
lrwxrwxrwx 1 root root 37 Sep 6 2017 sgminer.zcash.conf -> /opt/confs/default/sgminer.zcash.conf

ll /opt/miners

Which miners are compiled? This shows if there were any pimpups done to the miners themselves. May be necessary to pimpup a miner for good performance.

total 76
drwxr-xr-x 19 root root 12288 Dec 11 00:51 bfgminer
drwxr-xr-x 26 root root 4096 Dec 11 00:51 ccminer
drwxr-xr-x 9 root root 4096 Dec 11 00:51 cgminer
drwxr-xr-x 2 root root 4096 Feb 4 13:32 claymore-dual
drwxr-xr-x 2 root root 4096 Dec 11 00:30 claymore-xmr-amd
drwxr-xr-x 2 root root 4096 Dec 11 00:30 claymore-zcash-amd
drwxr-xr-x 13 root root 4096 Dec 11 00:51 cpuminer-multi
drwxr-xr-x 2 root root 4096 Mar 9 13:12 ethminer
drwxr-xr-x 13 root root 4096 Dec 11 00:51 lbrycrd-gpu
drwxr-xr-x 10 root root 4096 Oct 21 11:21 nheqminer
drwxr-xr-x 2 root root 4096 Mar 9 13:12 nvidia-ewbf-zcash
drwxr-xr-x 2 root root 4096 Dec 10 23:55 nvidia-ewbf-zcash.03-09-1312
drwxr-xr-x 8 root root 4096 Dec 11 00:51 optiminer-equihash
drwxr-xr-x 9 root root 4096 Dec 11 00:51 optiminer-zcash
drwxr-xr-x 13 root root 4096 Dec 11 00:51 sgminer
drwxr-xr-x 13 root root 4096 Dec 11 00:51 sgminer-pascal
drwxr-xr-x 14 root root 4096 Dec 11 00:51 sgminer-tpruvot

ll /opt/bins

Which kernel binary files have been created? This usually means the GPU will mine on that profile. Sometimes after a pimpup of a miner, you will need to run cleanbins command to remove these for good performance.

total 0

cat /root/gpuvars

Which gpuvars were modified? Need to make sure the environment variables needed for mining are intact.

export GPU_MAX_ALLOC_PERCENT=100
export GPU_USE_SYNC_OBJECTS=1
export GPU_MAX_HEAP_SIZE=100
export LANGUAGE=en_US.UTF-8
export LC_ALL=en_US.UTF-8
export PERL_JSON_BACKEND=0
export DISPLAY=:0
export GPU_FORCE_64BIT_PTR=1

cat /root/startup.sh

What startup parameters are you using? This may impact mining performance, fan speeds, and mining starting on boot.

#!/bin/bash
#
# ==================================================================
# .__
#______ |__| _____ ______ Portable Instant Mining Platform
#\____ \| |/ \____ \ PiMP
#| |_> > | Y Y \ |_> >
#| __/|__|__|_| / __/ Support: #PiMP on FreenodeIRC
#|__| \/|__| https://getPiMP.org
#
#
# Copyright (c) 2017 getPiMP.org. All Rights Reserved.
# Author: getPiMP.org
# License: This code is licensed for use with getPiMP.org only.
# Description: This is where you can change user-editable start up options.
# ==================================================================

#####################################################################
# INSTRUCTIONS - PLEASE READ
#####################################################################

# NOTE 1: How to edit this file.
# TO EDIT THIS FILE USE COMMAND: nano /etc/crontab
# IN GUI YOU CAN USE: leafpad /etc/crontab
# (edit command is just for the conf/pcfg!)

# NOTE 2: Absolute Paths
# In this file you have to specify absolute paths.
# Most of the pimp tools are in /opt/pimp.
# Examples: /opt/pimp/pimp --start 1
# /opt/minerfarm/minerfarm --start 1 (same effect)
# To determine what another tool uses for path you can do:
# which [command]
# e.g. which touch would output: /usr/bin/touch

# NOTE 3: This file is called by /etc/crontab upon boot.
# To schedule things on a regular basis (every 12 hours or every Friday at 5 PM),
# You would have to nano /etc/crontab directly.

# NOTE 4:
# If you get "permission denied" run: chmod +x /path/to/executable
# The file must be exectuable. Try running it by hand by typing it in.

# Thank you for reading the instructions.

#####################################################################
# GPU CONFIG
# Default: 20 seconds after boot, Set the fans to 60% as precaution.
#####################################################################

# Setup the clocks and fans according to what you edited
# Step 1: run this command manually: gputool --config
# it will make you a config file based on your current GPU setup.
#
# Step 2: nano /root/gpu-config.json
# put in what you want.

# Step 3: Run the gputool --config again and it will apply your values.

# Step 4: To have it run on boot, use this command. Timing is optimal
# for most GPUs.

sleep 35 && /opt/pimp/gputool --config

#####################################################################
# START MINING:
# Default: 25 seconds after boot, Start miner with ID 1
#####################################################################

sleep 160 && /opt/pimp/pimp --start 1

# Optional: Start other miners like CPU miner and ASIC
sleep 10 && yes | /opt/pimp/gputool --config
# sleep 35 && /opt/pimp/pimp --start 3

#####################################################################
# DISABLE GPU LEDs: This can save power or turn off lights if you want.
# OBVIOUSLY THIS IS FOR NVIDIA ONLY! NOT AMD.
# GPULogoBrightness can take a value from 0 to 100, this affects the
# brightness of the backlight.
# 0 - completely off, 100 - maximum brightness.
# Default: disabled, just remove the # to enable.
# If no GPU specified (like default) it will assign to all GPUs in the rig.
#####################################################################

#/usr/bin/nvidia-settings --assign GPULogoBrightness=0

#####################################################################
# USB LCD Displays
# Start the LCD display service. Optional, for USB LCD display support.
# These are for any "USB LCD device" commonly used with Raspi
# Example: https://www.adafruit.com/product/782
# The default will cycle through CPU Load, network, etc.
#####################################################################
# sleep 10 && systemctl LCDd start && sleep 10 && lcdproc

cat /root/gpu-config.json

What are the current fan/clock settings?

{
"comment": "Please see https://forum.getpimp.org for information about configuring this file",
"gpuSettings": [
{
"gpu_id": "20",
"fanspeed": "90",
"temptarget": "70"
},
{
"gpu_id": "1",
"NVCOffset": "90",
"NVMOffset": "500",
"NVPLimit": "130",
"fanspeed": "90",
"temptarget": "70"
},
{
"gpu_id": "2",
"NVCOffset": "90",
"NVMOffset": "500",
"NVPLimit": "150",
"fanspeed": "90",
"temptarget": "70"
},
{
"gpu_id": "3",
"NVCOffset": "90",
"NVMOffset": "500",
"NVPLimit": "130",
"fanspeed": "90",
"temptarget": "70"
},
{
"gpu_id": "4",
"NVCOffset": "90",
"NVMOffset": "500",
"NVPLimit": "130",
"fanspeed": "90",
"temptarget": "70"
},
{
"gpu_id": "5",
"NVCOffset": "80",
"NVMOffset": "400",
"NVPLimit": "110",
"fanspeed": "90",
"temptarget": "70"
},
{
"gpu_id": "6",
"NVCOffset": "90",
"NVMOffset": "500",
"NVPLimit": "130",
"fanspeed": "90",
"temptarget": "70"
},
{
"gpu_id": "7",
"NVCOffset": "90",
"NVMOffset": "500",
"NVPLimit": "150",
"fanspeed": "90",
"temptarget": "70"
},
{
"gpu_id": "8",
"NVCOffset": "90",
"NVMOffset": "500",
"NVPLimit": "130",
"fanspeed": "90",
"temptarget": "70"
},
{
"gpu_id": "9",
"NVCOffset": "80",
"NVMOffset": "400",
"NVPLimit": "110",
"fanspeed": "90",
"temptarget": "70"
},
{
"gpu_id": "10",
"NVCOffset": "80",
"NVMOffset": "400",
"NVPLimit": "110",
"fanspeed": "90",
"temptarget": "70"
},
{
"gpu_id": "0",
"NVCOffset": "90",
"NVMOffset": "500",
"NVPLimit": "130",
"fanspeed": "90",
"temptarget": "70"
}
]
}

PiMP Software and Services

ll /opt/pimp

What do the pimp software files look like?

total 5628
drwxr-xr-x 2 root root 4096 Nov 16 20:42 amdmeminfo
-rwxr-xr-x 1 root root 1540944 Oct 10 18:36 atiflash
-rwxr-xr-x 1 pimp pimp 66370 Mar 9 13:11 bootdetect
drwxr-xr-x 5 root root 4096 Dec 12 12:30 go
-rwxr-xr-x 1 root root 309879 Mar 9 13:11 gputool
-rwxr-xr-x 1 root root 121396 Mar 9 13:11 helpme
-rw-r--r-- 1 root root 3690 Mar 9 13:11 newpimp.txt
-rwxr-xr-x 1 root root 2879912 Oct 21 14:06 nvflash
drwxr-xr-x 2 root root 4096 Sep 6 2017 ohgodatool
-rwxr-xr-x 1 root root 406785 Mar 9 13:11 pimp
-rwxr-xr-x 1 root root 118159 Mar 9 13:11 pimpkey
-rw-r--r-- 1 root root 14223 Mar 9 13:11 pimpminers.conf
-rwxr-xr-x 1 root root 263435 Mar 9 13:11 pimpup
drwxr-xr-x 3 root root 4096 Dec 13 19:31 PolarisBiosEditor

ll /opt/minerfarm

What do the minerfarm software files look like?

total 1092
drwxr-xr-x 2 root root 4096 Sep 6 2017 lib
-rwxr-xr-x 1 root root 574148 Mar 9 13:11 minerfarm
-rwxr-xr-x 1 pimp pimp 528954 Mar 9 13:11 minerfarm_svc
-rw-r--r-- 1 root root 2809 Jul 28 2017 profiles.txt

cat /etc/crontab

What cron entries were modified? Just checking what you have on startup and if you are properly calling /root/startup.sh.

# /etc/crontab: system-wide crontab
# Unlike any other crontab you don't have to run the `crontab'
# command to install the new version when you edit this file
# and files in /etc/cron.d. These files also have username fields,
# that none of the other crontabs do.

SHELL=/bin/sh
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin

#####################################################################
# HOW TO SCHEDULE JOBS IN CRONTAB:
#####################################################################

# +---------------- minute (0 - 59)
# | +------------- hour (0 - 23)
# | | +---------- day of month (1 - 31)
# | | | +------- month (1 - 12)
# | | | | +---- day of week (0 - 6) (Sunday=0)
# | | | | |
# * * * * * command to be executed

# In other words:
# 1. Minute when the process will be started [0-60]
# 2. Hour when the process will be started [0-23]
# 3. Day of the month when the process will be started [1-28/29/30/31]
# 4. Month of the year when the process will be started [1-12]
# 5. Weekday when the process will be started [0-6] [0 is Sunday]

# FOR INTERVALS:
# Use the division bar (slash) to divide it up.
# all x min = */x
# example: 0/15 in minute column would be every 15 minutes.

# 5 8 * * 0 will run the job every sunday at 8:05 am.

# For more information and a neat calculator, see https://crontab.guru/

#####################################################################
# USER EDITABLE SETTINGS
# Use: nano /root/startup.sh to change your boot settings.
#
#####################################################################

# COMMANDS RUN ON BOOT UP:
# To run scripts on reboot, use: @reboot root /path/to/executable
# If you get "permission denied" run: chmod +x /path/to/executable
# It is best to edit the on-boot stuff with: nano /root/startup.sh

@reboot root /root/startup.sh

# COMMANDS RUN ON A SCHEDULE:

# Reboot automatically every 6 or 12 hours:
# 0 /6 * * * sync && echo b > /proc/sysrq-trigger
# 0 /12 * * * sync && echo b > /proc/sysrq-trigger

# This will reboot at 1 AM Zulu (Rig local time):
# 0 1 * * * sync && echo b > /proc/sysrq-trigger



#####################################################################
# DO NOT EDIT BELOW THIS LINE
#####################################################################
# m h dom mon dow user command
17 * * * * root cd / && run-parts --report /etc/cron.hourly
25 6 * * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily )
47 6 * * 7 root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.weekly )
52 6 1 * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.monthly )

minerfarm service

(( Is minerfarm agent service running? If it is not running, try: systemctl start minerfarm, or minerfarm and then use 'o' to start.))
● minerfarm.service - Service process for miner.farm agent
Loaded: loaded (/etc/systemd/system/minerfarm.service; enabled; vendor preset: enabled)
Active: active (running) since Sat 2018-03-10 08:07:20 EST; 5h 41min ago
Process: 584 ExecStart=/opt/minerfarm/minerfarm_svc (code=exited, status=0/SUCCESS)
Main PID: 754 (minerfarm_svc)
CGroup: /system.slice/minerfarm.service
└─754 /usr/bin/perl /opt/minerfarm/minerfarm_svc

Mar 10 08:07:15 pimp2 systemd[1]: Starting Service process for miner.farm agent...
Mar 10 08:07:20 pimp2 systemd[1]: minerfarm.service: PID file /var/run/minerfarm_svc.pid not readable (yet?) after start: No such file or directory
Mar 10 08:07:20 pimp2 systemd[1]: Started Service process for miner.farm agent.

pimp vnc service

Is the remote vnc desktop service running? If not, RDP and VNC will not work.

● pimpvnc.service - PiMP VNC Service
Loaded: loaded (/etc/systemd/user/pimpvnc.service; enabled; vendor preset: enabled)
Active: active (running) since Sat 2018-03-10 08:08:03 EST; 5h 41min ago
Main PID: 1566 (x11vnc)
CGroup: /user.slice/user-0.slice/user@0.service/pimpvnc.service
└─1566 /usr/bin/x11vnc -v -display :0 -auth /var/run/lightdm/root/\:0 -nopw -logappend /var/log/pimpvnc.log

Mar 10 08:08:03 pimp2 systemd[722]: Started PiMP VNC Service.
Mar 10 08:08:03 pimp2 x11vnc[1566]: PORT=5900

lightdm service

Is the desktop GUI service running? If this is not running you will not get GUI/RDP/VNC access, and may not

● lightdm.service - Light Display Manager
Loaded: loaded (/lib/systemd/system/lightdm.service; enabled; vendor preset: enabled)
Active: active (running) since Sat 2018-03-10 08:07:16 EST; 5h 41min ago
Docs: man:lightdm(1)
Process: 471 ExecStartPre=/bin/sh -c [ "$(basename $(cat /etc/X11/default-display-manager 2>/dev/null))" = "lightdm" ] (code=exited, status=0/SUCCESS)
Main PID: 510 (lightdm)
CGroup: /system.slice/lightdm.service
├─510 /usr/sbin/lightdm
└─597 /usr/lib/xorg/Xorg -core :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch

Mar 10 08:07:11 pimp2 systemd[1]: Starting Light Display Manager...
Mar 10 08:07:16 pimp2 systemd[1]: Started Light Display Manager.
Mar 10 08:08:01 pimp2 lightdm[1447]: pam_unix(lightdm-autologin:session): session opened for user root by (uid=0)

GPU Info

lspci -vt | grep VGA

What GPUs are seen by the PCI subsystem? This is Linux physically detecting the GPUs.

gputool --status

What GPUs are seen by the PIMP GPUTOOL SYSFS subsystem? AMDGPU cards only.

PIMP GPU Tool v20180220
GPUs type: Mixed

WARNING: Intel GPUs are not currently supported for mining
NOTE: At least one miner appears to be running.
GPU 1: nVidia GeForce GTX 1070 Ti, Temp: 55C, Fan: 90%, Core Clock: 1670 Mhz (90 Offset), Memory Clock: 4050 Mhz (500 Offset), Performance state: 2, Power Usage: 129.3W (130W Max)
GPU 2: nVidia GeForce GTX 1070, Temp: 57C, Fan: 90%, Core Clock: 1822 Mhz (90 Offset), Memory Clock: 4050 Mhz (500 Offset), Performance state: 2, Power Usage: 131.7W (130W Max)
GPU 3: nVidia GeForce GTX 1080, Temp: 58C, Fan: 90%, Core Clock: 1784 Mhz (90 Offset), Memory Clock: 4762 Mhz (500 Offset), Performance state: 2, Power Usage: 149.2W (150W Max)
GPU 4: nVidia GeForce GTX 1070, Temp: 56C, Fan: 90%, Core Clock: 1784 Mhz (90 Offset), Memory Clock: 4050 Mhz (500 Offset), Performance state: 2, Power Usage: 130.1W (130W Max)
GPU 5: nVidia GeForce GTX 1070 Ti, Temp: 54C, Fan: 90%, Core Clock: 1594 Mhz (80 Offset), Memory Clock: 4050 Mhz (400 Offset), Performance state: 2, Power Usage: 125.2W (130W Max)
GPU 6: nVidia GeForce GTX 1070 Ti, Temp: 60C, Fan: 90%, Core Clock: 1531 Mhz (90 Offset), Memory Clock: 3999 Mhz (500 Offset), Performance state: 2, Power Usage: 79.4W (110W Max)
GPU 7: nVidia GeForce GTX 1070 Ti, Temp: 56C, Fan: 90%, Core Clock: 1721 Mhz (90 Offset), Memory Clock: 4050 Mhz (500 Offset), Performance state: 2, Power Usage: 132.7W (130W Max)
GPU 8: nVidia GeForce GTX 1080, Temp: 57C, Fan: 90%, Core Clock: 1746 Mhz (90 Offset), Memory Clock: 4762 Mhz (500 Offset), Performance state: 2, Power Usage: 152.9W (150W Max)
GPU 9: nVidia GeForce GTX 1070 Ti, Temp: 54C, Fan: 90%, Core Clock: 1670 Mhz (80 Offset), Memory Clock: 4050 Mhz (400 Offset), Performance state: 2, Power Usage: 129.7W (130W Max)
GPU 10: nVidia GeForce GTX 1070, Temp: 58C, Fan: 90%, Core Clock: 1695 Mhz (80 Offset), Memory Clock: 3999 Mhz (400 Offset), Performance state: 2, Power Usage: 112.4W (110W Max)
GPU 11: nVidia GeForce GTX 1070 Ti, Temp: 56C, Fan: 90%, Core Clock: 1455 Mhz ( Offset), Memory Clock: 3999 Mhz ( Offset), Performance state: 2, Power Usage: 111.9W (110W Max)

/opt/pimp/atiflash -ai

Is atiflash seeing the GPUs? FGLRX/AMDGPU cards only.

Adapter not found

amdmeminfo

Is amdmeminfo seeing the GPUs? FGLRX/AMDGPU cards only.

AMDMemInfo by Zuikkis
Updated by Yann St.Arnaud

***** /opt/miners/sgminer/sgminer -n *****

Is sgminer seeing the GPUs? Very important. If sgminer sees your GPUs, then mining should work with the default profiles. Most likely if your GPUs are seen here but mining is not working, it is a conf error, network or pool issue.. Try default conf with del command, or use pimp --debug 1 to look at the miner screen directly in the debug mode to get more information.

[13:52:01] CL Platform vendor: NVIDIA Corporation
[13:52:01] CL Platform name: NVIDIA CUDA
[13:52:01] CL Platform version: OpenCL 1.2 CUDA 9.1.84
[13:52:01] Platform devices: 11
[13:52:01] 0 GeForce GTX 1080
[13:52:01] 1 GeForce GTX 1070 Ti
[13:52:01] 2 GeForce GTX 1070
[13:52:01] 3 GeForce GTX 1070
[13:52:01] 4 GeForce GTX 1070 Ti
[13:52:01] 5 GeForce GTX 1070 Ti
[13:52:01] 6 GeForce GTX 1070 Ti
[13:52:01] 7 GeForce GTX 1080
[13:52:01] 8 GeForce GTX 1070 Ti
[13:52:01] 9 GeForce GTX 1070
[13:52:01] 10 GeForce GTX 1070 Ti
[13:52:01] Number of ADL devices: 11
[13:52:01] Unable to load ATI ADL library.
[13:52:01] 11 GPU devices max detected

/opt/miners/optiminer-zcash/optiminer-zcash --list-devices

Is optiminer seeing the GPUs? AMDGPU/FGLRX only, same basic thoughts as sgminer above.

[2018-03-10 13:52:01.237] [info] Optiminer/Zcash 1.7.0 (C) Optiminer 2017
Platform (-c) 0, Device (-d) 0:
Platform Vendor: Nvidia
Device Name: GeForce GTX 1080
Driver Version: 390.25
Address bits: 64
Available memory: 8513978368
Platform (-c) 0, Device (-d) 1:
Platform Vendor: Nvidia
Device Name: GeForce GTX 1070 Ti
Driver Version: 390.25
Address bits: 64
Available memory: 8513978368
Platform (-c) 0, Device (-d) 2:
Platform Vendor: Nvidia
Device Name: GeForce GTX 1070
Driver Version: 390.25
Address bits: 64
Available memory: 8513978368
Platform (-c) 0, Device (-d) 3:
Platform Vendor: Nvidia
Device Name: GeForce GTX 1070
Driver Version: 390.25
Address bits: 64
Available memory: 8513978368
Platform (-c) 0, Device (-d) 4:
Platform Vendor: Nvidia
Device Name: GeForce GTX 1070 Ti
Driver Version: 390.25
Address bits: 64
Available memory: 8513978368
Platform (-c) 0, Device (-d) 5:
Platform Vendor: Nvidia
Device Name: GeForce GTX 1070 Ti
Driver Version: 390.25
Address bits: 64
Available memory: 8513978368
Platform (-c) 0, Device (-d) 6:
Platform Vendor: Nvidia
Device Name: GeForce GTX 1070 Ti
Driver Version: 390.25
Address bits: 64
Available memory: 8513978368
Platform (-c) 0, Device (-d) 7:
Platform Vendor: Nvidia
Device Name: GeForce GTX 1080
Driver Version: 390.25
Address bits: 64
Available memory: 8513978368
Platform (-c) 0, Device (-d) 8:
Platform Vendor: Nvidia
Device Name: GeForce GTX 1070 Ti
Driver Version: 390.25
Address bits: 64
Available memory: 8513978368
Platform (-c) 0, Device (-d) 9:
Platform Vendor: Nvidia
Device Name: GeForce GTX 1070
Driver Version: 390.25
Address bits: 64
Available memory: 8513978368
Platform (-c) 0, Device (-d) 10:
Platform Vendor: Nvidia
Device Name: GeForce GTX 1070 Ti
Driver Version: 390.25
Address bits: 64
Available memory: 8513978368

nvidia-smi

Is nvidia-smi seeing the GPUs? This is the main overclocking and admin tool for NVIDIA GPUs. If this looks good it is highly likely you will successfully mine.

Sat Mar 10 13:52:02 2018
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 390.25 Driver Version: 390.25 |
|-------------------------------+----------------------+----------------------+
| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. |
|===============================+======================+======================|
| 0 GeForce GTX 107... On | 00000000:01:00.0 Off | N/A |
| 90% 55C P2 127W / 130W | 674MiB / 8119MiB | 99% Default |
+-------------------------------+----------------------+----------------------+
| 1 GeForce GTX 1070 On | 00000000:02:00.0 Off | N/A |
| 90% 56C P2 131W / 130W | 620MiB / 8119MiB | 100% Default |
+-------------------------------+----------------------+----------------------+
| 2 GeForce GTX 1080 On | 00000000:03:00.0 Off | N/A |
| 90% 58C P2 151W / 150W | 646MiB / 8119MiB | 94% Default |
+-------------------------------+----------------------+----------------------+
| 3 GeForce GTX 1070 On | 00000000:04:00.0 Off | N/A |
| 90% 56C P2 76W / 130W | 620MiB / 8119MiB | 100% Default |
+-------------------------------+----------------------+----------------------+
| 4 GeForce GTX 107... On | 00000000:05:00.0 Off | N/A |
| 90% 54C P2 121W / 130W | 642MiB / 8119MiB | 100% Default |
+-------------------------------+----------------------+----------------------+
| 5 GeForce GTX 107... On | 00000000:08:00.0 Off | N/A |
| 90% 60C P2 112W / 110W | 642MiB / 8119MiB | 99% Default |
+-------------------------------+----------------------+----------------------+
| 6 GeForce GTX 107... On | 00000000:09:00.0 Off | N/A |
| 90% 56C P2 126W / 130W | 642MiB / 8119MiB | 100% Default |
+-------------------------------+----------------------+----------------------+
| 7 GeForce GTX 1080 On | 00000000:0A:00.0 Off | N/A |
| 90% 57C P2 141W / 150W | 646MiB / 8119MiB | 100% Default |
+-------------------------------+----------------------+----------------------+
| 8 GeForce GTX 107... On | 00000000:0B:00.0 Off | N/A |
| 90% 54C P2 128W / 130W | 642MiB / 8119MiB | 100% Default |
+-------------------------------+----------------------+----------------------+
| 9 GeForce GTX 1070 On | 00000000:0D:00.0 Off | N/A |
| 90% 58C P2 109W / 110W | 620MiB / 8119MiB | 100% Default |
+-------------------------------+----------------------+----------------------+
| 10 GeForce GTX 107... On | 00000000:0E:00.0 Off | N/A |
| 90% 55C P2 113W / 110W | 642MiB / 8119MiB | 96% Default |
+-------------------------------+----------------------+----------------------+

+-----------------------------------------------------------------------------+
| Processes: GPU Memory |
| GPU PID Type Process name Usage |
|=============================================================================|
| 0 597 G /usr/lib/xorg/Xorg 44MiB |
| 0 6942 C /opt/miners/nvidia-ewbf-zcash/ewbfminer 617MiB |
| 1 597 G /usr/lib/xorg/Xorg 12MiB |
| 1 6942 C /opt/miners/nvidia-ewbf-zcash/ewbfminer 595MiB |
| 2 597 G /usr/lib/xorg/Xorg 12MiB |
| 2 6942 C /opt/miners/nvidia-ewbf-zcash/ewbfminer 621MiB |
| 3 597 G /usr/lib/xorg/Xorg 12MiB |
| 3 6942 C /opt/miners/nvidia-ewbf-zcash/ewbfminer 595MiB |
| 4 597 G /usr/lib/xorg/Xorg 12MiB |
| 4 6942 C /opt/miners/nvidia-ewbf-zcash/ewbfminer 617MiB |
| 5 597 G /usr/lib/xorg/Xorg 12MiB |
| 5 6942 C /opt/miners/nvidia-ewbf-zcash/ewbfminer 617MiB |
| 6 597 G /usr/lib/xorg/Xorg 12MiB |
| 6 6942 C /opt/miners/nvidia-ewbf-zcash/ewbfminer 617MiB |
| 7 597 G /usr/lib/xorg/Xorg 12MiB |
| 7 6942 C /opt/miners/nvidia-ewbf-zcash/ewbfminer 621MiB |
| 8 597 G /usr/lib/xorg/Xorg 12MiB |
| 8 6942 C /opt/miners/nvidia-ewbf-zcash/ewbfminer 617MiB |
| 9 597 G /usr/lib/xorg/Xorg 12MiB |
| 9 6942 C /opt/miners/nvidia-ewbf-zcash/ewbfminer 595MiB |
| 10 597 G /usr/lib/xorg/Xorg 12MiB |
| 10 6942 C /opt/miners/nvidia-ewbf-zcash/ewbfminer 617MiB |
+-----------------------------------------------------------------------------+

nVidia Power use

What kind of power are the nVidia GPUs drawing?


==============NVSMI LOG==============

Timestamp : Sat Mar 10 13:52:04 2018
Driver Version : 390.25

Attached GPUs : 11
GPU 00000000:01:00.0
Power Readings
Power Management : Supported
Power Draw : 132.19 W
Power Limit : 130.00 W
Default Power Limit : 180.00 W
Enforced Power Limit : 130.00 W
Min Power Limit : 90.00 W
Max Power Limit : 217.00 W
Power Samples
Duration : 2.40 sec
Number of Samples : 119
Max : 140.95 W
Min : 77.31 W
Avg : 127.71 W

GPU 00000000:02:00.0
Power Readings
Power Management : Supported
Power Draw : 130.99 W
Power Limit : 130.00 W
Default Power Limit : 180.00 W
Enforced Power Limit : 130.00 W
Min Power Limit : 90.00 W
Max Power Limit : 200.00 W
Power Samples
Duration : 2.42 sec
Number of Samples : 119
Max : 143.58 W
Min : 74.11 W
Avg : 127.84 W

GPU 00000000:03:00.0
Power Readings
Power Management : Supported
Power Draw : 138.87 W
Power Limit : 150.00 W
Default Power Limit : 200.00 W
Enforced Power Limit : 150.00 W
Min Power Limit : 100.00 W
Max Power Limit : 216.00 W
Power Samples
Duration : 2.38 sec
Number of Samples : 119
Max : 162.45 W
Min : 116.24 W
Avg : 149.17 W

GPU 00000000:04:00.0
Power Readings
Power Management : Supported
Power Draw : 132.91 W
Power Limit : 130.00 W
Default Power Limit : 180.00 W
Enforced Power Limit : 130.00 W
Min Power Limit : 90.00 W
Max Power Limit : 200.00 W
Power Samples
Duration : 2.40 sec
Number of Samples : 119
Max : 134.63 W
Min : 66.11 W
Avg : 129.00 W

GPU 00000000:05:00.0
Power Readings
Power Management : Supported
Power Draw : 124.33 W
Power Limit : 130.00 W
Default Power Limit : 180.00 W
Enforced Power Limit : 130.00 W
Min Power Limit : 90.00 W
Max Power Limit : 217.00 W
Power Samples
Duration : 2.37 sec
Number of Samples : 119
Max : 124.70 W
Min : 99.30 W
Avg : 121.52 W

GPU 00000000:08:00.0
Power Readings
Power Management : Supported
Power Draw : 109.46 W
Power Limit : 110.00 W
Default Power Limit : 180.00 W
Enforced Power Limit : 110.00 W
Min Power Limit : 90.00 W
Max Power Limit : 217.00 W
Power Samples
Duration : 2.40 sec
Number of Samples : 119
Max : 120.90 W
Min : 60.37 W
Avg : 109.65 W

GPU 00000000:09:00.0
Power Readings
Power Management : Supported
Power Draw : 128.23 W
Power Limit : 130.00 W
Default Power Limit : 180.00 W
Enforced Power Limit : 130.00 W
Min Power Limit : 90.00 W
Max Power Limit : 217.00 W
Power Samples
Duration : 2.38 sec
Number of Samples : 119
Max : 135.55 W
Min : 89.72 W
Avg : 129.02 W

GPU 00000000:0A:00.0
Power Readings
Power Management : Supported
Power Draw : 152.45 W
Power Limit : 150.00 W
Default Power Limit : 200.00 W
Enforced Power Limit : 150.00 W
Min Power Limit : 100.00 W
Max Power Limit : 216.00 W
Power Samples
Duration : 2.45 sec
Number of Samples : 119
Max : 162.55 W
Min : 109.11 W
Avg : 148.25 W

GPU 00000000:0B:00.0
Power Readings
Power Management : Supported
Power Draw : 130.02 W
Power Limit : 130.00 W
Default Power Limit : 180.00 W
Enforced Power Limit : 130.00 W
Min Power Limit : 90.00 W
Max Power Limit : 217.00 W
Power Samples
Duration : 2.38 sec
Number of Samples : 119
Max : 134.72 W
Min : 109.27 W
Avg : 129.33 W

GPU 00000000:0D:00.0
Power Readings
Power Management : Supported
Power Draw : 107.99 W
Power Limit : 110.00 W
Default Power Limit : 220.00 W
Enforced Power Limit : 110.00 W
Min Power Limit : 110.00 W
Max Power Limit : 264.00 W
Power Samples
Duration : 2.53 sec
Number of Samples : 119
Max : 114.74 W
Min : 69.37 W
Avg : 109.52 W

GPU 00000000:0E:00.0
Power Readings
Power Management : Supported
Power Draw : 109.65 W
Power Limit : 110.00 W
Default Power Limit : 180.00 W
Enforced Power Limit : 110.00 W
Min Power Limit : 90.00 W
Max Power Limit : 217.00 W
Power Samples
Duration : 2.41 sec
Number of Samples : 119
Max : 127.02 W
Min : 80.61 W
Avg : 109.72 W

xrandr -q

What information does Xorg have?

Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
DVI-D-0 disconnected primary (normal left inverted right x axis y axis)
HDMI-0 disconnected (normal left inverted right x axis y axis)
DP-0 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
DP-3 disconnected (normal left inverted right x axis y axis)
DP-4 disconnected (normal left inverted right x axis y axis)
DP-5 disconnected (normal left inverted right x axis y axis)

Hardware Info

Disk SMART Data for /dev/sda

What is the status of the boot disk? Errors or Reallocated Sectors means the disk should be replaced immediately.

smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.15.0-pimp-cheesesteak] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA MK1255GSX H
Serial Number: X9O7PYWUT
LU WWN Device Id: 5 000039 212486c91
Firmware Version: FG001Q
User Capacity: 120,034,123,776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 1.5 Gb/s
Local Time is: Sat Mar 10 13:52:05 2018 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 45) minutes.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1022
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 5004
5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 24
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 082 082 000 Old_age Always - 7339
10 Spin_Retry_Count 0x0033 199 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 4896
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 2025
192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 695
193 Load_Cycle_Count 0x0032 092 092 000 Old_age Always - 81605
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 33 (Min/Max 12/57)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 24
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 27
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 90
222 Loaded_Hours 0x0032 090 090 000 Old_age Always - 4228
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 258
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0

SMART Error Log Version: 1
ATA Error Count: 872 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 872 occurred at disk power-on lifetime: 6613 hours (275 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 22 0f b0 56 67 Error: UNC at LBA = 0x0756b00f = 123121679

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 20 20 00 b0 56 40 00 00:11:51.829 READ FPDMA QUEUED
ef 02 00 00 00 00 a0 00 00:11:51.001 SET FEATURES [Enable write cache]
aa aa aa aa aa aa aa ff 00:11:50.845 [RESERVED]
60 20 18 00 b0 56 40 00 00:11:47.032 READ FPDMA QUEUED
ef 02 00 00 00 00 a0 00 00:11:46.203 SET FEATURES [Enable write cache]

Error 871 occurred at disk power-on lifetime: 6613 hours (275 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 1a 0f b0 56 67 Error: UNC at LBA = 0x0756b00f = 123121679

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 20 18 00 b0 56 40 00 00:11:47.032 READ FPDMA QUEUED
ef 02 00 00 00 00 a0 00 00:11:46.203 SET FEATURES [Enable write cache]
aa aa aa aa aa aa aa ff 00:11:46.044 [RESERVED]
60 20 10 00 b0 56 40 00 00:11:42.234 READ FPDMA QUEUED
ef 02 00 00 00 00 a0 00 00:11:41.406 SET FEATURES [Enable write cache]

Error 870 occurred at disk power-on lifetime: 6613 hours (275 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 12 0f b0 56 67 Error: UNC at LBA = 0x0756b00f = 123121679

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 20 10 00 b0 56 40 00 00:11:42.234 READ FPDMA QUEUED
ef 02 00 00 00 00 a0 00 00:11:41.406 SET FEATURES [Enable write cache]
aa aa aa aa aa aa aa ff 00:11:41.244 [RESERVED]
60 20 08 00 b0 56 40 00 00:11:37.437 READ FPDMA QUEUED
ef 02 00 00 00 00 a0 00 00:11:36.577 SET FEATURES [Enable write cache]

Error 869 occurred at disk power-on lifetime: 6613 hours (275 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 0a 0f b0 56 67 Error: UNC at LBA = 0x0756b00f = 123121679

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 20 08 00 b0 56 40 00 00:11:37.437 READ FPDMA QUEUED
ef 02 00 00 00 00 a0 00 00:11:36.577 SET FEATURES [Enable write cache]
aa aa aa aa aa aa aa ff 00:11:36.444 [RESERVED]
60 20 f8 00 b0 56 40 00 00:11:32.665 READ FPDMA QUEUED
60 20 f0 e0 af 56 40 00 00:11:32.643 READ FPDMA QUEUED

Error 868 occurred at disk power-on lifetime: 6613 hours (275 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 fa 0f b0 56 67 Error: UNC at LBA = 0x0756b00f = 123121679

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 20 f8 00 b0 56 40 00 00:11:32.665 READ FPDMA QUEUED
60 20 f0 e0 af 56 40 00 00:11:32.643 READ FPDMA QUEUED
ef 02 00 00 00 00 a0 00 00:11:32.568 SET FEATURES [Enable write cache]
aa aa aa aa aa aa aa ff 00:11:32.410 [RESERVED]
60 00 e8 e0 af 56 40 00 00:11:28.599 READ FPDMA QUEUED

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Chassis Temps

How are the system temperatures?

pch_skylake-virtual-0
Adapter: Virtual device
temp1: +41.0°C

coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +37.0°C (high = +80.0°C, crit = +100.0°C)
Core 0: +37.0°C (high = +80.0°C, crit = +100.0°C)
Core 1: +35.0°C (high = +80.0°C, crit = +100.0°C)

Logs

tail -50 /var/log/agent.log

Log for minerfarm agent.

[PID] 2018-03-10 13:02:54Z: (FCTRL) service started.
[PID] 2018-03-10 13:02:54Z: (FCTRL) local IP is 192.168.1.8.
[PID] 2018-03-10 13:07:20Z: (FCTRL) service started.
[PID] 2018-03-10 13:07:20Z: (FCTRL) local IP is 192.168.1.8.
[PID] 2018-03-10 13:12:15Z: Starting command line miner on localhost
bin: ewbfminer
conf: ewbf.zcash.pcfg
[PID] 2018-03-10 13:12:15Z: Using port 4028...
[PID] 2018-03-10 13:12:17Z: Miner screen started...

tail -50 /var/log/miner.log

Pimp unified miner logging of the miner instances.

tail -20 /var/log/pimpup.log

Log of pimpup updates.

[2018-Mar-09-13:11:33] Started PIMPUp v20180116 =======
[2018-Mar-09-13:11:34] PIMPUp version out of date
[2018-Mar-09-13:11:42] PIMPUp updated
[2018-Mar-09-13:11:46] Started PIMPUp v20180215 =======
[2018-Mar-09-13:11:46] PIMPUp version is current
[2018-Mar-09-13:11:47] PIMP SW version out of date
[2018-Mar-09-13:12:02] PIMP SW updated
[2018-Mar-09-13:12:21] Started update for 245
[2018-Mar-09-13:12:25] Update succeeded for 245
[2018-Mar-09-13:12:28] Started update for 250
[2018-Mar-09-13:12:30] Update succeeded for 250
[2018-Mar-09-13:12:34] Updated default conf files

/bin/dmesg | tail -25

Log of kernel ring messages. This can show some of the things that flash by on boot. Mostly warnings. Also when you plug things into the box like USB drives or network cables, it will show here.

[ 53.835610] i2c i2c-74: adapter [NVIDIA i2c adapter 1 at e:00.0] registered
[ 53.836000] i2c-dev: adapter [NVIDIA i2c adapter 2 at e:00.0] registered as minor 75
[ 53.836009] i2c i2c-75: adapter [NVIDIA i2c adapter 2 at e:00.0] registered
[ 53.836670] i2c-dev: adapter [NVIDIA i2c adapter 4 at e:00.0] registered as minor 76
[ 53.836679] i2c i2c-76: adapter [NVIDIA i2c adapter 4 at e:00.0] registered
[ 53.836801] i2c-dev: adapter [NVIDIA i2c adapter 6 at e:00.0] registered as minor 77
[ 53.836806] i2c i2c-77: adapter [NVIDIA i2c adapter 6 at e:00.0] registered
[ 53.836844] i2c-dev: adapter [NVIDIA i2c adapter 7 at e:00.0] registered as minor 78
[ 53.836848] i2c i2c-78: adapter [NVIDIA i2c adapter 7 at e:00.0] registered
[ 53.836881] i2c-dev: adapter [NVIDIA i2c adapter 8 at e:00.0] registered as minor 79
[ 53.836885] i2c i2c-79: adapter [NVIDIA i2c adapter 8 at e:00.0] registered
[ 53.836918] i2c-dev: adapter [NVIDIA i2c adapter 9 at e:00.0] registered as minor 80
[ 53.836924] i2c i2c-80: adapter [NVIDIA i2c adapter 9 at e:00.0] registered
[ 53.995052] nvidia-modeset: Allocated GPU:8 (GPU-1d1e2c2c-43a3-f9a5-d5ec-739ee89e5168) @ PCI:0000:0b:00.0
[ 54.206353] nvidia-modeset: Freed GPU:8 (GPU-1d1e2c2c-43a3-f9a5-d5ec-739ee89e5168) @ PCI:0000:0b:00.0
[ 54.225065] nvidia-modeset: Allocated GPU:8 (GPU-1d1e2c2c-43a3-f9a5-d5ec-739ee89e5168) @ PCI:0000:0b:00.0
[ 54.306837] nvidia-modeset: Allocated GPU:9 (GPU-0e812c77-37b5-aa5f-8579-5b2fa6407352) @ PCI:0000:0d:00.0
[ 54.543122] nvidia-modeset: Freed GPU:9 (GPU-0e812c77-37b5-aa5f-8579-5b2fa6407352) @ PCI:0000:0d:00.0
[ 54.567166] nvidia-modeset: Allocated GPU:9 (GPU-0e812c77-37b5-aa5f-8579-5b2fa6407352) @ PCI:0000:0d:00.0
[ 64.178865] nvidia-modeset: Allocated GPU:10 (GPU-85520718-a990-637b-a5e3-ba89c80b7a1f) @ PCI:0000:0e:00.0
[ 64.422606] nvidia-modeset: Freed GPU:10 (GPU-85520718-a990-637b-a5e3-ba89c80b7a1f) @ PCI:0000:0e:00.0
[ 64.451035] nvidia-modeset: Allocated GPU:10 (GPU-85520718-a990-637b-a5e3-ba89c80b7a1f) @ PCI:0000:0e:00.0
[ 322.795989] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 239
[ 4621.478959] perf: interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[12370.830454] perf: interrupt took too long (3141 > 3127), lowering kernel.perf_event_max_sample_rate to 63500

tail -100 /var/log/Xorg.0.lorg

Xorg log. Shows problems with displays, monitors, and GPUs when trying to load the GUI.

https://helpme.getpimp.org/-1520707926.html