PiMP Troubleshooter


You can troubleshoot your mining rig using this information.



Calling all PiMPs! Farmer 1492 Needs Assistance!
URL: https://miner.farm/farmer/1492/

PiMP Rescue at: 2018-03-29 23:39

PiMP Mining Status

Hardware Summary

View your rig hardware at a glance.

Motherboard: Product Name: H81 Pro BTC R2.0
2-Core CPU:
model name : Intel(R) Celeron(R) CPU G1840 @ 2.80GHz
model name : Intel(R) Celeron(R) CPU G1840 @ 2.80GHz
RAM:
MemTotal: 8108568 kB
MemFree: 5985324 kB
MemAvailable: 6557568 kB
Primary Boot Disk: Device Model: KINGSTON SUV400S37240G

AMD GPUs:

NVIDIA GPUs:
GPU 0: GeForce GTX 1050 Ti (UUID: GPU-67a888dd-7de2-2776-5668-27428e0e9c8a)
GPU 1: GeForce GTX 1050 Ti (UUID: GPU-fc3f636a-15e2-ea4f-589f-5eaef977df15)
GPU 2: GeForce GTX 1050 Ti (UUID: GPU-6e3f4f81-7573-59db-ea9b-10bec083d9b7)
GPU 3: GeForce GTX 1050 Ti (UUID: GPU-9186b83f-98bb-f81a-f4ff-3b2a15d0a971)
GPU 4: GeForce GTX 1060 3GB (UUID: GPU-90af9dcc-438c-bd0a-ea33-8efe9e1e41c1)

Software Summary

View your rig software at a glance.

PiMP Image v 2.4.2-all rc30
PIMP Software v20180327
Current Status: Agent: PimpRig2 (Running) Total HR: [0.00Kh/s] Miners running [0] GPUs [none active]

pimp --list

This shows the current mining profiles loaded in minerfarm with pimp --add, and their status. Note the ID numbers. These are used with commands like pimp --add and pimp --test.

Miners:
ID 1 localhost:4028 bminer bminer.equihash.pcfg (Stopped)

pimp --status

This shows the current PiMP Rig Mining status similar to the header in the minerfarm Agent Console.

Agent name: PimpRig2 - IP: 192.168.1.87
Agent service is: Running
Last update: Success
Last message: All good!
Total farm hashrate: 0Mh/s

PiMP Configuration

ll /opt/confs

Which confs were modified? The default confs are thoroughly tested by PIMP Testing and Support. We recommend you start with these, verify mining is working, then customize with your own settings and wallets.

total 44
drwxr-xr-x 4 root root 4096 Mar 29 14:02 .
drwxr-xr-x 11 root root 4096 Jan 6 07:11 ..
drwxr-xr-x 3 root root 4096 Mar 1 12:05 backups
-rw-r--r-- 1 root root 1241 Jan 20 18:55 bfg.gsd.conf
lrwxrwxrwx 1 root root 32 Sep 6 2017 bfg.zeus.conf -> /opt/confs/default/bfg.zeus.conf
-rw-r--r-- 1 root root 4407 Mar 29 16:37 bminer.equihash.pcfg
lrwxrwxrwx 1 root root 36 Feb 6 14:39 ccminer.aeon.pcfg -> /opt/confs/default/ccminer.aeon.pcfg
lrwxrwxrwx 1 root root 36 Feb 6 14:39 ccminer.dash.pcfg -> /opt/confs/default/ccminer.dash.pcfg
lrwxrwxrwx 1 root root 39 Mar 29 11:07 ccminer.groestl.pcfg -> /opt/confs/default/ccminer.groestl.pcfg
lrwxrwxrwx 1 root root 36 Feb 6 14:39 ccminer.lbry.pcfg -> /opt/confs/default/ccminer.lbry.pcfg
lrwxrwxrwx 1 root root 39 Feb 6 14:39 ccminer.lyra2v2.pcfg -> /opt/confs/default/ccminer.lyra2v2.pcfg
lrwxrwxrwx 1 root root 38 Mar 29 11:07 ccminer.lyra2z.pcfg -> /opt/confs/default/ccminer.lyra2z.pcfg
lrwxrwxrwx 1 root root 35 Feb 6 14:39 ccminer.neo.pcfg -> /opt/confs/default/ccminer.neo.pcfg
lrwxrwxrwx 1 root root 37 Feb 15 11:40 ccminer.nist5.pcfg -> /opt/confs/default/ccminer.nist5.pcfg
lrwxrwxrwx 1 root root 35 Feb 6 14:39 ccminer.phi.pcfg -> /opt/confs/default/ccminer.phi.pcfg
lrwxrwxrwx 1 root root 37 Feb 6 14:39 ccminer.skein.pcfg -> /opt/confs/default/ccminer.skein.pcfg
lrwxrwxrwx 1 root root 37 Feb 6 14:39 ccminer.skunk.pcfg -> /opt/confs/default/ccminer.skunk.pcfg
lrwxrwxrwx 1 root root 37 Mar 29 11:07 ccminer.xevan.pcfg -> /opt/confs/default/ccminer.xevan.pcfg
lrwxrwxrwx 1 root root 35 Feb 4 21:01 ccminer.xmr.pcfg -> /opt/confs/default/ccminer.xmr.pcfg
lrwxrwxrwx 1 root root 35 Sep 6 2017 cgminer.gsd.conf -> /opt/confs/default/cgminer.gsd.conf
lrwxrwxrwx 1 root root 36 Sep 6 2017 cgminer.zeus.conf -> /opt/confs/default/cgminer.zeus.conf
lrwxrwxrwx 1 root root 37 Nov 29 15:29 claymore.dual.pcfg -> /opt/confs/default/claymore.dual.pcfg
lrwxrwxrwx 1 root root 40 Nov 11 12:31 claymore.xmr.amd.pcfg -> /opt/confs/default/claymore.xmr.amd.pcfg
lrwxrwxrwx 1 root root 38 Feb 11 13:46 claymore.zcash.pcfg -> /opt/confs/default/claymore.zcash.pcfg
lrwxrwxrwx 1 root root 43 Oct 4 15:09 cpuminer-multi.aeon.pcfg -> /opt/confs/default/cpuminer-multi.aeon.pcfg
lrwxrwxrwx 1 root root 42 Sep 6 2017 cpuminer-multi.xmr.pcfg -> /opt/confs/default/cpuminer-multi.xmr.pcfg
drwxr-xr-x 2 root root 4096 Mar 29 11:07 default
-rw-r--r-- 1 root root 5679 Mar 29 11:49 dstm.equihash.pcfg
lrwxrwxrwx 1 root root 36 Mar 29 11:07 ethminer.all.pcfg -> /opt/confs/default/ethminer.all.pcfg
lrwxrwxrwx 1 root root 36 Feb 14 16:45 ethminer.amd.pcfg -> /opt/confs/default/ethminer.amd.pcfg
lrwxrwxrwx 1 root root 39 Feb 22 12:41 ethminer.nvidia.pcfg -> /opt/confs/default/ethminer.nvidia.pcfg
-rw-r--r-- 1 root root 7944 Mar 18 12:47 ewbf.zcash.pcfg
lrwxrwxrwx 1 root root 39 Feb 11 13:46 nheqminer.zcash.pcfg -> /opt/confs/default/nheqminer.zcash.pcfg
lrwxrwxrwx 1 root root 36 Jan 23 12:27 nsgminer.neo.conf -> /opt/confs/default/nsgminer.neo.conf
lrwxrwxrwx 1 root root 42 Feb 11 13:46 optiminer.equihash.pcfg -> /opt/confs/default/optiminer.equihash.pcfg
lrwxrwxrwx 1 root root 28 Sep 6 2017 README.md -> /opt/confs/default/README.md
lrwxrwxrwx 1 root root 36 Sep 6 2017 sgminer.dash.conf -> /opt/confs/default/sgminer.dash.conf
lrwxrwxrwx 1 root root 35 Sep 6 2017 sgminer.eth.conf -> /opt/confs/default/sgminer.eth.conf
lrwxrwxrwx 1 root root 39 Sep 6 2017 sgminer.groestl.conf -> /opt/confs/default/sgminer.groestl.conf
lrwxrwxrwx 1 root root 36 Sep 6 2017 sgminer.lbry.conf -> /opt/confs/default/sgminer.lbry.conf
lrwxrwxrwx 1 root root 39 Feb 14 16:45 sgminer.lyra2v2.conf -> /opt/confs/default/sgminer.lyra2v2.conf
lrwxrwxrwx 1 root root 38 Mar 29 11:07 sgminer.lyra2z.conf -> /opt/confs/default/sgminer.lyra2z.conf
lrwxrwxrwx 1 root root 37 Jan 23 00:20 sgminer.multi.conf -> /opt/confs/default/sgminer.multi.conf
lrwxrwxrwx 1 root root 38 Sep 6 2017 sgminer.pascal.conf -> /opt/confs/default/sgminer.pascal.conf
lrwxrwxrwx 1 root root 36 Sep 6 2017 sgminer.sigt.conf -> /opt/confs/default/sgminer.sigt.conf
lrwxrwxrwx 1 root root 38 Sep 6 2017 sgminer.x11evo.conf -> /opt/confs/default/sgminer.x11evo.conf
lrwxrwxrwx 1 root root 35 Oct 20 15:22 sgminer.xmr.conf -> /opt/confs/default/sgminer.xmr.conf
lrwxrwxrwx 1 root root 37 Feb 11 13:46 sgminer.zcash.conf -> /opt/confs/default/sgminer.zcash.conf

ll /opt/miners

Which miners are compiled? This shows if there were any pimpups done to the miners themselves. May be necessary to pimpup a miner for good performance.

total 84
drwxr-xr-x 19 root root 12288 Dec 10 22:51 bfgminer
drwxr-xr-x 2 root root 4096 Mar 29 16:37 bminer
drwxr-xr-x 26 root root 4096 Dec 10 22:51 ccminer
drwxr-xr-x 9 root root 4096 Dec 10 22:51 cgminer
drwxr-xr-x 2 root root 4096 Mar 29 11:08 claymore-dual
drwxr-xr-x 2 root root 4096 Dec 10 22:30 claymore-xmr-amd
drwxr-xr-x 2 root root 4096 Jan 31 17:53 claymore-zcash-amd
drwxr-xr-x 13 root root 4096 Dec 10 22:51 cpuminer-multi
drwxr-xr-x 2 root root 4096 Mar 29 11:09 dstm
drwxr-xr-x 2 root root 4096 Mar 29 11:09 ethminer
drwxr-xr-x 13 root root 4096 Dec 10 22:51 lbrycrd-gpu
drwxr-xr-x 10 root root 4096 Oct 21 08:21 nheqminer
drwxr-xr-x 19 root root 4096 Jan 23 11:44 nsgminer
drwxr-xr-x 2 root root 4096 Mar 14 15:28 nvidia-ewbf-zcash
drwxr-xr-x 8 root root 4096 Dec 10 22:51 optiminer-equihash
drwxr-xr-x 9 root root 4096 Dec 10 22:51 optiminer-zcash
drwxr-xr-x 19 root root 4096 Jan 31 16:17 sgminer
drwxr-xr-x 13 root root 4096 Dec 10 22:51 sgminer-pascal
drwxr-xr-x 14 root root 4096 Dec 10 22:51 sgminer-tpruvot

ll /opt/bins

Which kernel binary files have been created? This usually means the GPU will mine on that profile. Sometimes after a pimpup of a miner, you will need to run cleanbins command to remove these for good performance.

total 0

cat /root/gpuvars

Which gpuvars were modified? Need to make sure the environment variables needed for mining are intact.

export GPU_MAX_ALLOC_PERCENT=100
export GPU_USE_SYNC_OBJECTS=1
export GPU_MAX_HEAP_SIZE=100
export LANGUAGE=en_US.UTF-8
export LC_ALL=en_US.UTF-8
export PERL_JSON_BACKEND=0
export DISPLAY=:0
export GPU_FORCE_64BIT_PTR=1

cat /root/startup.sh

What startup parameters are you using? This may impact mining performance, fan speeds, and mining starting on boot.

#!/bin/bash
#
# ==================================================================
# .__
#______ |__| _____ ______ Portable Instant Mining Platform
#\____ \| |/ \____ \ PiMP
#| |_> > | Y Y \ |_> >
#| __/|__|__|_| / __/ Support: #PiMP on FreenodeIRC
#|__| \/|__| https://getPiMP.org
#
#
# Copyright (c) 2017 getPiMP.org. All Rights Reserved.
# Author: getPiMP.org
# License: This code is licensed for use with getPiMP.org only.
# Description: This is where you can change user-editable start up options.
# ==================================================================

#####################################################################
# INSTRUCTIONS - PLEASE READ
#####################################################################

# NOTE 1: How to edit this file.
# TO EDIT THIS FILE USE COMMAND: nano /etc/crontab
# IN GUI YOU CAN USE: leafpad /etc/crontab
# (edit command is just for the conf/pcfg!)

# NOTE 2: Absolute Paths
# In this file you have to specify absolute paths.
# Most of the pimp tools are in /opt/pimp.
# Examples: /opt/pimp/pimp --start 1
# /opt/minerfarm/minerfarm --start 1 (same effect)
# To determine what another tool uses for path you can do:
# which [command]
# e.g. which touch would output: /usr/bin/touch

# NOTE 3: This file is called by /etc/crontab upon boot.
# To schedule things on a regular basis (every 12 hours or every Friday at 5 PM),
# You would have to nano /etc/crontab directly.

# NOTE 4:
# If you get "permission denied" run: chmod +x /path/to/executable
# The file must be exectuable. Try running it by hand by typing it in.

# Thank you for reading the instructions.

#####################################################################
# GPU CONFIG
# Default: 20 seconds after boot, Set the fans to 60% as precaution.
#####################################################################

# Setup the clocks and fans according to what you edited
# Step 1: run this command manually: gputool --config
# it will make you a config file based on your current GPU setup.
#
# Step 2: nano /root/gpu-config.json
# put in what you want.

# Step 3: Run the gputool --config again and it will apply your values.

# Step 4: To have it run on boot, use this command. Timing is optimal
# for most GPUs.

sleep 20 && /opt/pimp/gputool --config

# /usr/binxrandr --fb 1600x900

#####################################################################
# START MINING:
# Default: 25 seconds after boot, Start miner with ID 1
#####################################################################

sleep 25 && /opt/pimp/pimp --start 1

# Optional: Start other miners like CPU miner and ASIC

# sleep 30 && /opt/pimp/pimp --start 2
# sleep 35 && /opt/pimp/pimp --start 3

#####################################################################
# DISABLE GPU LEDs: This can save power or turn off lights if you want.
# OBVIOUSLY THIS IS FOR NVIDIA ONLY! NOT AMD.
# GPULogoBrightness can take a value from 0 to 100, this affects the
# brightness of the backlight.
# 0 - completely off, 100 - maximum brightness.
# Default: disabled, just remove the # to enable.
# If no GPU specified (like default) it will assign to all GPUs in the rig.
#####################################################################

#/usr/bin/nvidia-settings --assign GPULogoBrightness=0

#####################################################################
# USB LCD Displays
# Start the LCD display service. Optional, for USB LCD display support.
# These are for any "USB LCD device" commonly used with Raspi
# Example: https://www.adafruit.com/product/782
# The default will cycle through CPU Load, network, etc.
#####################################################################
# sleep 10 && systemctl LCDd start && sleep 10 && lcdproc

cat /root/gpu-config.json

What are the current fan/clock settings?

{"gpuSettings":[{"gpu_id":"0","NVCOffset":"0","fanspeed":"65","NVPLimit":"75","NVMOffset":"0","temptarget":"70"},{"fanspeed":"65","NVMOffset":"0","NVPLimit":"75","NVCOffset":"0","gpu_id":"1","temptarget":"70"},{"temptarget":"70","NVMOffset":"0","fanspeed":"65","NVPLimit":"75","NVCOffset":"0","gpu_id":"2"},{"NVMOffset":"0","fanspeed":"65","NVPLimit":"75","NVCOffset":"0","gpu_id":"3","temptarget":"70"},{"gpu_id":"4","fanspeed":"65","NVPLimit":"30","NVCOffset":"0","NVMOffset":"0","temptarget":"70"},{"temptarget":"70","gpu_id":5,"fanspeed":"65","NVPLimit":"30","NVMOffset":"0","NVCOffset":"0"}]}

PiMP Software and Services

ll /opt/pimp

What do the pimp software files look like?

total 5616
drwxr-xr-x 2 root root 4096 Nov 16 18:42 amdmeminfo
-rwxr-xr-x 1 root root 1540944 Oct 10 15:36 atiflash
-rwxr-xr-x 1 pimp pimp 59110 Mar 29 11:06 bootdetect
drwxr-xr-x 5 root root 4096 Dec 12 10:30 go
-rwxr-xr-x 1 root root 309755 Mar 29 11:06 gputool
-rwxr-xr-x 1 root root 120900 Mar 29 11:06 helpme
-rw-r--r-- 1 root root 3690 Mar 29 11:06 newpimp.txt
-rwxr-xr-x 1 root root 2879912 Oct 21 11:06 nvflash
drwxr-xr-x 2 root root 4096 Sep 6 2017 ohgodatool
-rwxr-xr-x 1 root root 404473 Mar 29 11:06 pimp
-rwxr-xr-x 1 root root 117238 Mar 29 11:06 pimpkey
-rw-r--r-- 1 root root 15142 Mar 29 11:06 pimpminers.conf
-rwxr-xr-x 1 root root 263435 Feb 21 22:54 pimpup
drwxr-xr-x 3 root root 4096 Dec 13 17:31 PolarisBiosEditor

ll /opt/minerfarm

What do the minerfarm software files look like?

total 1096
drwxr-xr-x 2 root root 4096 Sep 6 2017 lib
-rwxr-xr-x 1 root root 569500 Mar 29 11:06 minerfarm
-rwxr-xr-x 1 pimp pimp 540208 Mar 29 11:06 minerfarm_svc
-rw-r--r-- 1 root root 2809 Jul 28 2017 profiles.txt

cat /etc/crontab

What cron entries were modified? Just checking what you have on startup and if you are properly calling /root/startup.sh.

# /etc/crontab: system-wide crontab
# Unlike any other crontab you don't have to run the `crontab'
# command to install the new version when you edit this file
# and files in /etc/cron.d. These files also have username fields,
# that none of the other crontabs do.

SHELL=/bin/sh
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin

#####################################################################
# HOW TO SCHEDULE JOBS IN CRONTAB:
#####################################################################

# +---------------- minute (0 - 59)
# | +------------- hour (0 - 23)
# | | +---------- day of month (1 - 31)
# | | | +------- month (1 - 12)
# | | | | +---- day of week (0 - 6) (Sunday=0)
# | | | | |
# * * * * * command to be executed

# In other words:
# 1. Minute when the process will be started [0-60]
# 2. Hour when the process will be started [0-23]
# 3. Day of the month when the process will be started [1-28/29/30/31]
# 4. Month of the year when the process will be started [1-12]
# 5. Weekday when the process will be started [0-6] [0 is Sunday]

# FOR INTERVALS:
# Use the division bar (slash) to divide it up.
# all x min = */x
# example: 0/15 in minute column would be every 15 minutes.

# 5 8 * * 0 will run the job every sunday at 8:05 am.

# For more information and a neat calculator, see https://crontab.guru/

#####################################################################
# USER EDITABLE SETTINGS
# Use: nano /root/startup.sh to change your boot settings.
#
#####################################################################

# COMMANDS RUN ON BOOT UP:
# To run scripts on reboot, use: @reboot root /path/to/executable
# If you get "permission denied" run: chmod +x /path/to/executable
# It is best to edit the on-boot stuff with: nano /root/startup.sh

@reboot root /root/startup.sh

# COMMANDS RUN ON A SCHEDULE:

# Reboot automatically every 6 or 12 hours:
# 0 /6 * * * sync && echo b > /proc/sysrq-trigger
# 0 /12 * * * sync && echo b > /proc/sysrq-trigger

# This will reboot at 1 AM Zulu (Rig local time):
# 0 1 * * * sync && echo b > /proc/sysrq-trigger



#####################################################################
# DO NOT EDIT BELOW THIS LINE
#####################################################################
# m h dom mon dow user command
17 * * * * root cd / && run-parts --report /etc/cron.hourly
25 6 * * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily )
47 6 * * 7 root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.weekly )
52 6 1 * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.monthly )

minerfarm service

(( Is minerfarm agent service running? If it is not running, try: systemctl start minerfarm, or minerfarm and then use 'o' to start.))
● minerfarm.service - Service process for miner.farm agent
Loaded: loaded (/etc/systemd/system/minerfarm.service; enabled; vendor preset: enabled)
Active: active (running) since Thu 2018-03-29 11:15:07 MST; 5h 24min ago
Process: 550 ExecStart=/opt/minerfarm/minerfarm_svc (code=exited, status=0/SUCCESS)
Main PID: 613 (minerfarm_svc)
CGroup: /system.slice/minerfarm.service
└─613 /usr/bin/perl /opt/minerfarm/minerfarm_svc

Mar 29 11:15:07 PiMpRig2 systemd[1]: Starting Service process for miner.farm agent...
Mar 29 11:15:07 PiMpRig2 systemd[1]: minerfarm.service: PID file /var/run/minerfarm_svc.pid not readable (yet?) after start: No such file or directory
Mar 29 11:15:07 PiMpRig2 systemd[1]: Started Service process for miner.farm agent.

pimp vnc service

Is the remote vnc desktop service running? If not, RDP and VNC will not work.

● pimpvnc.service - PiMP VNC Service
Loaded: loaded (/etc/systemd/user/pimpvnc.service; enabled; vendor preset: enabled)
Active: active (running) since Thu 2018-03-29 11:15:13 MST; 5h 24min ago
Main PID: 739 (x11vnc)
CGroup: /user.slice/user-0.slice/user@0.service/pimpvnc.service
└─739 /usr/bin/x11vnc -v -display :0 -auth .Xauthority -nopw -logappend /var/log/pimpvnc.log

Mar 29 11:15:13 PiMpRig2 systemd[735]: Started PiMP VNC Service.
Mar 29 11:15:13 PiMpRig2 x11vnc[739]: PORT=5900

lightdm service

Is the desktop GUI service running? If this is not running you will not get GUI/RDP/VNC access, and may not

● lightdm.service - Light Display Manager
Loaded: loaded (/lib/systemd/system/lightdm.service; enabled; vendor preset: enabled)
Active: active (running) since Thu 2018-03-29 11:15:07 MST; 5h 24min ago
Docs: man:lightdm(1)
Process: 526 ExecStartPre=/bin/sh -c [ "$(basename $(cat /etc/X11/default-display-manager 2>/dev/null))" = "lightdm" ] (code=exited, status=0/SUCCESS)
Main PID: 537 (lightdm)
CGroup: /system.slice/lightdm.service
├─537 /usr/sbin/lightdm
└─559 /usr/lib/xorg/Xorg -core :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch

Mar 29 11:15:07 PiMpRig2 systemd[1]: Starting Light Display Manager...
Mar 29 11:15:07 PiMpRig2 systemd[1]: Started Light Display Manager.
Mar 29 11:15:13 PiMpRig2 lightdm[730]: pam_unix(lightdm-autologin:session): session opened for user root by (uid=0)

GPU Info

lspci -v | grep VGA

What GPUs are seen by the PCI subsystem? This is Linux physically detecting the GPUs.

01:00.0 VGA compatible controller: NVIDIA Corporation GP107 [GeForce GTX 1050 Ti] (rev a1) (prog-if 00 [VGA controller])
02:00.0 VGA compatible controller: NVIDIA Corporation GP107 [GeForce GTX 1050 Ti] (rev a1) (prog-if 00 [VGA controller])
03:00.0 VGA compatible controller: NVIDIA Corporation GP107 [GeForce GTX 1050 Ti] (rev a1) (prog-if 00 [VGA controller])
04:00.0 VGA compatible controller: NVIDIA Corporation GP107 [GeForce GTX 1050 Ti] (rev a1) (prog-if 00 [VGA controller])
05:00.0 VGA compatible controller: NVIDIA Corporation GP106 [GeForce GTX 1060 3GB] (rev a1) (prog-if 00 [VGA controller])

gputool --status

What GPUs are seen by the PIMP GPUTOOL SYSFS subsystem? AMDGPU cards only.

PIMP GPU Tool v20180321
GPUs type: NVI
NOTE: At least one miner appears to be running.
GPU 0: nVidia GeForce GTX 1050 Ti, Temp: 61C, Fan: 51%, Core Clock: 1733 Mhz (0 Offset), Memory Clock: 3504 Mhz (0 Offset), Performance state: Max, Power Usage: 0W (75W Max)
GPU 1: nVidia GeForce GTX 1050 Ti, Temp: 60C, Fan: 45%, Core Clock: 1721 Mhz (0 Offset), Memory Clock: 3504 Mhz (0 Offset), Performance state: Max, Power Usage: 0W (75W Max)
GPU 2: nVidia GeForce GTX 1050 Ti, Temp: 64C, Fan: 48%, Core Clock: 1759 Mhz (0 Offset), Memory Clock: 3504 Mhz (0 Offset), Performance state: Max, Power Usage: 0W (75W Max)
GPU 3: nVidia GeForce GTX 1050 Ti, Temp: 65C, Fan: 48%, Core Clock: 1771 Mhz (0 Offset), Memory Clock: 3504 Mhz (0 Offset), Performance state: Max, Power Usage: 0W (75W Max)
GPU 4: nVidia GeForce GTX 1060 3GB, Temp: 62C, Fan: 34%, Core Clock: 1873 Mhz (0 Offset), Memory Clock: 3802 Mhz (0 Offset), Performance state: 2, Power Usage: 100.4W (120W Max)

/opt/pimp/atiflash -ai

Is atiflash seeing the GPUs? FGLRX/AMDGPU cards only.

Adapter not found

amdmeminfo

Is amdmeminfo seeing the GPUs? FGLRX/AMDGPU cards only.

AMDMemInfo by Zuikkis
Updated by Yann St.Arnaud

***** /opt/miners/sgminer/sgminer -n *****

Is sgminer seeing the GPUs? Very important. If sgminer sees your GPUs, then mining should work with the default profiles. Most likely if your GPUs are seen here but mining is not working, it is a conf error, network or pool issue.. Try default conf with del command, or use pimp --debug 1 to look at the miner screen directly in the debug mode to get more information.

[16:39:23] CL Platform vendor: NVIDIA Corporation
[16:39:23] CL Platform name: NVIDIA CUDA
[16:39:23] CL Platform version: OpenCL 1.2 CUDA 9.0.229
[16:39:23] Platform devices: 5
[16:39:23] 0 GeForce GTX 1060 3GB
[16:39:23] 1 GeForce GTX 1050 Ti
[16:39:23] 2 GeForce GTX 1050 Ti
[16:39:23] 3 GeForce GTX 1050 Ti
[16:39:23] 4 GeForce GTX 1050 Ti
[16:39:23] Number of ADL devices: 5
[16:39:23] Unable to load ATI ADL library.
[16:39:23] 5 GPU devices max detected

/opt/miners/optiminer-zcash/optiminer-zcash --list-devices

Is optiminer seeing the GPUs? AMDGPU/FGLRX only, same basic thoughts as sgminer above.

[2018-03-29 16:39:23.874] [info] Optiminer/Zcash 1.7.0 (C) Optiminer 2017
Platform (-c) 0, Device (-d) 0:
Platform Vendor: Nvidia
Device Name: GeForce GTX 1060 3GB
Driver Version: 384.98
Address bits: 64
Available memory: 3160276992
Platform (-c) 0, Device (-d) 1:
Platform Vendor: Nvidia
Device Name: GeForce GTX 1050 Ti
Driver Version: 384.98
Address bits: 64
Available memory: 4232904704
Platform (-c) 0, Device (-d) 2:
Platform Vendor: Nvidia
Device Name: GeForce GTX 1050 Ti
Driver Version: 384.98
Address bits: 64
Available memory: 4235001856
Platform (-c) 0, Device (-d) 3:
Platform Vendor: Nvidia
Device Name: GeForce GTX 1050 Ti
Driver Version: 384.98
Address bits: 64
Available memory: 4235001856
Platform (-c) 0, Device (-d) 4:
Platform Vendor: Nvidia
Device Name: GeForce GTX 1050 Ti
Driver Version: 384.98
Address bits: 64
Available memory: 4235001856

nvidia-smi

Is nvidia-smi seeing the GPUs? This is the main overclocking and admin tool for NVIDIA GPUs. If this looks good it is highly likely you will successfully mine.

Thu Mar 29 16:39:23 2018
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 384.98 Driver Version: 384.98 |
|-------------------------------+----------------------+----------------------+
| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. |
|===============================+======================+======================|
| 0 GeForce GTX 105... Off | 00000000:01:00.0 Off | N/A |
| 52% 62C P0 ERR! / 75W | 651MiB / 4036MiB | 100% Default |
+-------------------------------+----------------------+----------------------+
| 1 GeForce GTX 105... Off | 00000000:02:00.0 Off | N/A |
| 45% 60C P0 ERR! / 75W | 584MiB / 4038MiB | 100% Default |
+-------------------------------+----------------------+----------------------+
| 2 GeForce GTX 105... Off | 00000000:03:00.0 Off | N/A |
| 48% 64C P0 ERR! / 75W | 584MiB / 4038MiB | 100% Default |
+-------------------------------+----------------------+----------------------+
| 3 GeForce GTX 105... Off | 00000000:04:00.0 Off | N/A |
| 49% 65C P0 ERR! / 75W | 584MiB / 4038MiB | 98% Default |
+-------------------------------+----------------------+----------------------+
| 4 GeForce GTX 106... Off | 00000000:05:00.0 Off | N/A |
| 34% 62C P2 101W / 120W | 655MiB / 3013MiB | 100% Default |
+-------------------------------+----------------------+----------------------+

+-----------------------------------------------------------------------------+
| Processes: GPU Memory |
| GPU PID Type Process name Usage |
|=============================================================================|
| 0 559 G /usr/lib/xorg/Xorg 47MiB |
| 0 10759 C /opt/miners/bminer/bminer 592MiB |
| 1 559 G /usr/lib/xorg/Xorg 13MiB |
| 1 10759 C /opt/miners/bminer/bminer 559MiB |
| 2 559 G /usr/lib/xorg/Xorg 13MiB |
| 2 10759 C /opt/miners/bminer/bminer 559MiB |
| 3 559 G /usr/lib/xorg/Xorg 13MiB |
| 3 10759 C /opt/miners/bminer/bminer 559MiB |
| 4 559 G /usr/lib/xorg/Xorg 13MiB |
| 4 10759 C /opt/miners/bminer/bminer 630MiB |
+-----------------------------------------------------------------------------+

nVidia Power use

What kind of power are the nVidia GPUs drawing?


==============NVSMI LOG==============

Timestamp : Thu Mar 29 16:39:24 2018
Driver Version : 384.98

Attached GPUs : 5
GPU 00000000:01:00.0
Power Readings
Power Management : Supported
Power Draw : Unknown Error
Power Limit : 75.00 W
Default Power Limit : 75.00 W
Enforced Power Limit : 75.00 W
Min Power Limit : 52.50 W
Max Power Limit : 75.00 W
Power Samples
Duration : 2.37 sec
Number of Samples : 119
Max : 70.31 W
Min : 67.87 W
Avg : 68.95 W

GPU 00000000:02:00.0
Power Readings
Power Management : Supported
Power Draw : Unknown Error
Power Limit : 75.00 W
Default Power Limit : 75.00 W
Enforced Power Limit : 75.00 W
Min Power Limit : 52.50 W
Max Power Limit : 75.00 W
Power Samples
Duration : 2.37 sec
Number of Samples : 119
Max : 69.57 W
Min : 68.28 W
Avg : 69.11 W

GPU 00000000:03:00.0
Power Readings
Power Management : Supported
Power Draw : Unknown Error
Power Limit : 75.00 W
Default Power Limit : 75.00 W
Enforced Power Limit : 75.00 W
Min Power Limit : 52.50 W
Max Power Limit : 75.00 W
Power Samples
Duration : 2.37 sec
Number of Samples : 119
Max : 69.73 W
Min : 68.23 W
Avg : 69.25 W

GPU 00000000:04:00.0
Power Readings
Power Management : Supported
Power Draw : Unknown Error
Power Limit : 75.00 W
Default Power Limit : 75.00 W
Enforced Power Limit : 75.00 W
Min Power Limit : 52.50 W
Max Power Limit : 75.00 W
Power Samples
Duration : 2.37 sec
Number of Samples : 119
Max : 70.08 W
Min : 68.22 W
Avg : 69.22 W

GPU 00000000:05:00.0
Power Readings
Power Management : Supported
Power Draw : 101.53 W
Power Limit : 120.00 W
Default Power Limit : 120.00 W
Enforced Power Limit : 120.00 W
Min Power Limit : 60.00 W
Max Power Limit : 140.00 W
Power Samples
Duration : 2.37 sec
Number of Samples : 119
Max : 104.54 W
Min : 97.33 W
Avg : 101.56 W

xrandr -q

What information does Xorg have?

Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
DVI-D-0 disconnected primary (normal left inverted right x axis y axis)
HDMI-0 disconnected (normal left inverted right x axis y axis)
DP-0 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)

Hardware Info

Disk SMART Data for /dev/sda

What is the status of the boot disk? Errors or Reallocated Sectors means the disk should be replaced immediately.

smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.15.0-rc2-pimp-celery+] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model: KINGSTON SUV400S37240G
Serial Number: 50026B777300C060
LU WWN Device Id: 0 550380 440010000
Firmware Version: 0C3K87RA
User Capacity: 240,057,409,536 bytes [240 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: Unknown(0x0ffe), ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Mar 29 16:39:24 2018 MST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 5) seconds.
Offline data collection
capabilities: (0x71) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 5) minutes.
Conveyance self-test routine
recommended polling time: ( 0) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 48
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1732
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 108
100 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 460448
101 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 64000
170 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 63
175 Program_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0
176 Erase_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0
177 Wear_Leveling_Count 0x0032 100 100 000 Old_age Always - 135
178 Used_Rsvd_Blk_Cnt_Chip 0x0002 100 100 000 Old_age Always - 0
180 Unused_Rsvd_Blk_Cnt_Tot 0x0002 100 100 000 Old_age Always - 1330
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 1
187 Reported_Uncorrect 0x0033 100 100 000 Pre-fail Always - 0
194 Temperature_Celsius 0x0022 031 100 000 Old_age Always - 31 (Min/Max 19/39)
195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
199 UDMA_CRC_Error_Count 0x0012 100 100 000 Old_age Always - 0
201 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 0
204 Soft_ECC_Correction 0x0032 100 100 000 Old_age Always - 0
231 Temperature_Celsius 0x0032 100 100 000 Old_age Always - 0
233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 652
234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 340
241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 507
242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 257
250 Read_Error_Retry_Rate 0x0032 100 100 000 Old_age Always - 0

SMART Error Log Version: 0
No Errors Logged

SMART Self-test log structure revision number 0
Warning: ATA Specification requires self-test log structure revision number = 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Chassis Temps

How are the system temperatures?

coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +41.0°C (high = +80.0°C, crit = +100.0°C)
Core 0: +41.0°C (high = +80.0°C, crit = +100.0°C)
Core 1: +37.0°C (high = +80.0°C, crit = +100.0°C)

Logs

tail -50 /var/log/agent.log

Log for minerfarm agent.

[PID] 2018-03-29 18:12:04Z: (CLI user) Miner screen started...
[PID] 2018-03-29 18:14:16Z: (CLI user) Starting command line miner on localhost
bin: ewbfminer
conf: ewbf.zcash.pcfg
[PID] 2018-03-29 18:14:16Z: (CLI user) Using port 4028...
[PID] 2018-03-29 18:14:16Z: (CLI user) Starting screen 'miner-4028' with: /opt/miners/nvidia-ewbf-zcash/ewbfminer --server equihash.usa.nicehash.com --user 1FR7cP4dxgPuftZb4LGUtCex628mGuqPyV.PiMpRig2 --pass x,d=512 --api 127.0.0.1:4028 --port 3357 --eexit 1 --fee 0.01 --tempunits C --templimit 85 --intensity 56
[PID] 2018-03-29 18:14:18Z: (CLI user) Miner screen started...
[PID] 2018-03-29 18:14:34Z: (FCTRL) service STOPPED. Interrupted system call
[PID] 2018-03-29 18:15:07Z: (FCTRL) service started.
[PID] 2018-03-29 18:15:17Z: (FCTRL) local IP is 192.168.1.87.
[PID] 2018-03-29 18:15:52Z: Starting command line miner on localhost
bin: ewbfminer
conf: ewbf.zcash.pcfg
[PID] 2018-03-29 18:15:52Z: Using port 4028...
[PID] 2018-03-29 18:15:54Z: Miner screen started...
[PID] 2018-03-29 18:47:53Z: (CLI user) Starting command line miner on localhost
bin: dstm-miner
conf: dstm.equihash.pcfg
[PID] 2018-03-29 18:47:53Z: (CLI user) Using port 4028...
[PID] 2018-03-29 18:47:53Z: (CLI user) Starting screen 'miner-4028' with: /opt/miners/dstm/dstm-miner --server equihash.usa.nicehash.com --user 1FR7cP4dxgPuftZb4LGUtCex628mGuqPyV.PiMpRig2 --pass x,d=512 --telemetry=127.0.0.1:4028 4028 --port 3357 --time --temp-target 70
[PID] 2018-03-29 18:47:55Z: (CLI user) Miner screen started...
[PID] 2018-03-29 19:00:36Z: (CLI user) Starting command line miner on localhost
bin: dstm-miner
conf: dstm.equihash.pcfg
[PID] 2018-03-29 19:00:36Z: (CLI user) Using port 4028...
[PID] 2018-03-29 19:00:38Z: (CLI user) Miner screen started...
[PID] 2018-03-29 23:18:53Z: (CLI user) Starting command line miner on localhost
bin: bminer
conf: bminer.equihash.pcfg
[PID] 2018-03-29 23:18:53Z: (CLI user) Using port 4028...
[PID] 2018-03-29 23:18:53Z: (CLI user) Starting screen 'miner-4028' with: /opt/miners/bminer/bminer -uri stratum://1FR7cP4dxgPuftZb4LGUtCex628mGuqPyV@stratum://equihash.usa.nicehash.com:3357 -api 127.0.0.1:4028 -max-temperature 85
[PID] 2018-03-29 23:19:09Z: (CLI user) Miner screen exited - the mining program failed to start.
[PID] 2018-03-29 23:19:10Z: (CLI user) Error output: Bminer: When Crypto-mining Made Fast (v6.0.0-d111154)


[PID] 2018-03-29 23:27:47Z: (CLI user) Starting command line miner on localhost
bin: bminer
conf: bminer.equihash.pcfg
[PID] 2018-03-29 23:27:47Z: (CLI user) Using port 4028...
[PID] 2018-03-29 23:27:47Z: (CLI user) Starting screen 'miner-4028' with: /opt/miners/bminer/bminer -uri stratum://1FR7cP4dxgPuftZb4LGUtCex628mGuqPyV.PiMpRig2:x@stratum://equihash.usa.nicehash.com:3357 -api 127.0.0.1:4028 -max-temperature 85
[PID] 2018-03-29 23:28:04Z: (CLI user) Miner screen exited - the mining program failed to start.
[PID] 2018-03-29 23:28:04Z: (CLI user) Error output: Bminer: When Crypto-mining Made Fast (v6.0.0-d111154)


[PID] 2018-03-29 23:37:09Z: (CLI user) Starting command line miner on localhost
bin: bminer
conf: bminer.equihash.pcfg
[PID] 2018-03-29 23:37:09Z: (CLI user) Using port 4028...
[PID] 2018-03-29 23:37:09Z: (CLI user) Starting screen 'miner-4028' with: /opt/miners/bminer/bminer -uri stratum://1FR7cP4dxgPuftZb4LGUtCex628mGuqPyV.PiMpRig2:x@equihash.usa.nicehash.com:3357 -api 127.0.0.1:4028 -max-temperature 85
[PID] 2018-03-29 23:37:11Z: (CLI user) Miner screen started...

tail -50 /var/log/miner.log

Pimp unified miner logging of the miner instances.

tail -20 /var/log/pimpup.log

Log of pimpup updates.

[2018-Mar-14-12:15:45] Update succeeded for 240
[2018-Mar-22-10:41:56] Started PIMPUp v20180215 =======
[2018-Mar-22-10:41:57] PIMPUp version is current
[2018-Mar-22-10:41:57] PIMP SW version is current
[2018-Mar-22-10:42:17] Started update for 240
[2018-Mar-22-10:42:19] Updated default conf files
[2018-Mar-22-10:42:20] Update succeeded for 240
[2018-Mar-29-11:06:40] Started PIMPUp v20180215 =======
[2018-Mar-29-11:06:41] PIMPUp version is current
[2018-Mar-29-11:06:41] PIMP SW version out of date
[2018-Mar-29-11:06:56] PIMP SW updated
[2018-Mar-29-11:07:21] Updated default conf files
[2018-Mar-29-11:08:48] Started update for 240
[2018-Mar-29-11:08:51] Update succeeded for 240
[2018-Mar-29-11:09:15] Started update for 245
[2018-Mar-29-11:09:20] Update succeeded for 245
[2018-Mar-29-11:09:25] Started update for 251
[2018-Mar-29-11:09:37] Update succeeded for 251
[2018-Mar-29-11:09:41] Started update for 252
[2018-Mar-29-11:09:44] Update succeeded for 252

/bin/dmesg | tail -25

Log of kernel ring messages. This can show some of the things that flash by on boot. Mostly warnings. Also when you plug things into the box like USB drives or network cables, it will show here.

[ 12.132719] i2c i2c-9: adapter [NVIDIA i2c adapter 4 at 4:00.0] registered
[ 12.133618] i2c-dev: adapter [NVIDIA i2c adapter 6 at 4:00.0] registered as minor 10
[ 12.133628] i2c i2c-10: adapter [NVIDIA i2c adapter 6 at 4:00.0] registered
[ 12.133683] i2c-dev: adapter [NVIDIA i2c adapter 7 at 4:00.0] registered as minor 11
[ 12.133688] i2c i2c-11: adapter [NVIDIA i2c adapter 7 at 4:00.0] registered
[ 12.137227] nvidia-modeset: Allocated GPU:3 (GPU-9186b83f-98bb-f81a-f4ff-3b2a15d0a971) @ PCI:0000:04:00.0
[ 13.139761] i2c-dev: adapter [NVIDIA i2c adapter 1 at 5:00.0] registered as minor 12
[ 13.139770] i2c i2c-12: adapter [NVIDIA i2c adapter 1 at 5:00.0] registered
[ 13.140100] i2c-dev: adapter [NVIDIA i2c adapter 2 at 5:00.0] registered as minor 13
[ 13.140107] i2c i2c-13: adapter [NVIDIA i2c adapter 2 at 5:00.0] registered
[ 13.140774] i2c-dev: adapter [NVIDIA i2c adapter 4 at 5:00.0] registered as minor 14
[ 13.140782] i2c i2c-14: adapter [NVIDIA i2c adapter 4 at 5:00.0] registered
[ 13.141104] i2c-dev: adapter [NVIDIA i2c adapter 6 at 5:00.0] registered as minor 15
[ 13.141111] i2c i2c-15: adapter [NVIDIA i2c adapter 6 at 5:00.0] registered
[ 13.141172] i2c-dev: adapter [NVIDIA i2c adapter 7 at 5:00.0] registered as minor 16
[ 13.141177] i2c i2c-16: adapter [NVIDIA i2c adapter 7 at 5:00.0] registered
[ 13.141206] i2c-dev: adapter [NVIDIA i2c adapter 8 at 5:00.0] registered as minor 17
[ 13.141210] i2c i2c-17: adapter [NVIDIA i2c adapter 8 at 5:00.0] registered
[ 13.141242] i2c-dev: adapter [NVIDIA i2c adapter 9 at 5:00.0] registered as minor 18
[ 13.141246] i2c i2c-18: adapter [NVIDIA i2c adapter 9 at 5:00.0] registered
[ 13.150994] nvidia-modeset: Allocated GPU:4 (GPU-90af9dcc-438c-bd0a-ea33-8efe9e1e41c1) @ PCI:0000:05:00.0
[ 13.288717] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 242
[ 33.784399] random: crng init done
[ 7389.918050] perf: interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[12230.791381] perf: interrupt took too long (3135 > 3133), lowering kernel.perf_event_max_sample_rate to 63750

tail -100 /var/log/Xorg.0.lorg

Xorg log. Shows problems with displays, monitors, and GPUs when trying to load the GUI.

https://helpme.getpimp.org/PimpRig2-1522366764.html