PiMP Troubleshooter


You can troubleshoot your mining rig using this information.



Calling all PiMPs! Farmer 3523 Needs Assistance!
URL: https://miner.farm/farmer/3523/

PiMP Rescue at: 2018-03-21 19:11

PiMP Mining Status

Hardware Summary

View your rig hardware at a glance.

Motherboard: Product Name: H110 Pro BTC+
4-Core CPU:
model name : Intel(R) Core(TM) i3-7100 CPU @ 3.90GHz
model name : Intel(R) Core(TM) i3-7100 CPU @ 3.90GHz
model name : Intel(R) Core(TM) i3-7100 CPU @ 3.90GHz
model name : Intel(R) Core(TM) i3-7100 CPU @ 3.90GHz
RAM:
MemTotal: 8108188 kB
MemFree: 5372844 kB
MemAvailable: 5489456 kB
Primary Boot Disk: Device Model: ST9500325AS

AMD GPUs:

NVIDIA GPUs:
GPU 0: GeForce GTX 1070 (UUID: GPU-a4d5a681-4944-e7e3-2cce-78f1cb48f9fe)
GPU 1: GeForce GTX 1070 (UUID: GPU-70310525-8eb3-a646-b408-41a72843682b)
GPU 2: GeForce GTX 1070 (UUID: GPU-404b750f-f8ac-6c81-2d98-d7ca22a20193)
GPU 3: GeForce GTX 1070 (UUID: GPU-c1ed1bf3-6b26-e65d-e0c7-9aa17caf4505)
GPU 4: GeForce GTX 1070 (UUID: GPU-6fe67998-0ae8-19aa-fda4-270de182da51)
GPU 5: GeForce GTX 1070 (UUID: GPU-22ea0d3a-4b1c-a649-82c7-d00cb0973f9c)
GPU 6: GeForce GTX 1070 (UUID: GPU-20214e5a-6daf-6d05-11f8-6715fb141ef0)
GPU 7: GeForce GTX 1070 Ti (UUID: GPU-3ac213df-3bd7-ec8f-2197-ee6b81fb5a5e)
GPU 8: GeForce GTX 1070 (UUID: GPU-34720f6a-a9a3-ee82-48c8-7075e279e4f1)
GPU 9: GeForce GTX 1070 (UUID: GPU-7b9a00eb-9f40-310d-7a81-e09a321fa75c)
GPU 10: GeForce GTX 1070 (UUID: GPU-c914799a-3bf2-e1ba-e4a4-339c406163f5)
GPU 11: GeForce GTX 1070 (UUID: GPU-4c16aafa-8456-b734-0ffa-0e381766f648)

Software Summary

View your rig software at a glance.

PiMP Image v 2.5-all rc30
PIMP Software v20180314
Current Status: Agent: RIG1 (Running) Total HR: [0.00Kh/s] Miners running [1] GPUs [AAAAAAAAAAAA]

pimp --list

This shows the current mining profiles loaded in minerfarm with pimp --add, and their status. Note the ID numbers. These are used with commands like pimp --add and pimp --test.

Miners:
ID 1 localhost:4028 dstm-miner dstm.equihash.pcfg (Running)

pimp --status

This shows the current PiMP Rig Mining status similar to the header in the minerfarm Agent Console.

Agent name: RIG1 - IP: 192.168.1.15
Agent service is: Running
Last update: Success
Last message: All good!
Total farm hashrate: 0Mh/s

PiMP Configuration

ll /opt/confs

Which confs were modified? The default confs are thoroughly tested by PIMP Testing and Support. We recommend you start with these, verify mining is working, then customize with your own settings and wallets.

total 20
drwxr-xr-x 3 root root 4096 Mar 21 13:55 .
drwxr-xr-x 11 root root 4096 Jan 6 09:11 ..
lrwxrwxrwx 1 root root 31 Sep 6 2017 bfg.gsd.conf -> /opt/confs/default/bfg.gsd.conf
lrwxrwxrwx 1 root root 32 Sep 6 2017 bfg.zeus.conf -> /opt/confs/default/bfg.zeus.conf
lrwxrwxrwx 1 root root 39 Feb 4 02:57 bminer.equihash.pcfg -> /opt/confs/default/bminer.equihash.pcfg
lrwxrwxrwx 1 root root 36 Mar 21 13:54 ccminer.aeon.pcfg -> /opt/confs/default/ccminer.aeon.pcfg
lrwxrwxrwx 1 root root 36 Mar 21 13:54 ccminer.dash.pcfg -> /opt/confs/default/ccminer.dash.pcfg
lrwxrwxrwx 1 root root 36 Mar 21 13:54 ccminer.lbry.pcfg -> /opt/confs/default/ccminer.lbry.pcfg
lrwxrwxrwx 1 root root 39 Mar 21 13:54 ccminer.lyra2v2.pcfg -> /opt/confs/default/ccminer.lyra2v2.pcfg
lrwxrwxrwx 1 root root 35 Mar 21 13:54 ccminer.neo.pcfg -> /opt/confs/default/ccminer.neo.pcfg
lrwxrwxrwx 1 root root 37 Mar 21 13:54 ccminer.nist5.pcfg -> /opt/confs/default/ccminer.nist5.pcfg
lrwxrwxrwx 1 root root 35 Mar 21 13:54 ccminer.phi.pcfg -> /opt/confs/default/ccminer.phi.pcfg
lrwxrwxrwx 1 root root 37 Mar 21 13:54 ccminer.skein.pcfg -> /opt/confs/default/ccminer.skein.pcfg
lrwxrwxrwx 1 root root 37 Mar 21 13:54 ccminer.skunk.pcfg -> /opt/confs/default/ccminer.skunk.pcfg
lrwxrwxrwx 1 root root 35 Feb 4 02:57 ccminer.xmr.pcfg -> /opt/confs/default/ccminer.xmr.pcfg
lrwxrwxrwx 1 root root 35 Sep 6 2017 cgminer.gsd.conf -> /opt/confs/default/cgminer.gsd.conf
lrwxrwxrwx 1 root root 36 Sep 6 2017 cgminer.zeus.conf -> /opt/confs/default/cgminer.zeus.conf
lrwxrwxrwx 1 root root 37 Nov 29 17:29 claymore.dual.pcfg -> /opt/confs/default/claymore.dual.pcfg
lrwxrwxrwx 1 root root 40 Nov 11 14:31 claymore.xmr.amd.pcfg -> /opt/confs/default/claymore.xmr.amd.pcfg
lrwxrwxrwx 1 root root 38 Sep 6 2017 claymore.zcash.pcfg -> /opt/confs/default/claymore.zcash.pcfg
lrwxrwxrwx 1 root root 43 Oct 4 18:09 cpuminer-multi.aeon.pcfg -> /opt/confs/default/cpuminer-multi.aeon.pcfg
lrwxrwxrwx 1 root root 42 Sep 6 2017 cpuminer-multi.xmr.pcfg -> /opt/confs/default/cpuminer-multi.xmr.pcfg
drwxr-xr-x 2 root root 4096 Mar 21 13:54 default
-rw-r--r-- 1 root root 5655 Mar 21 13:55 dstm.equihash.pcfg
lrwxrwxrwx 1 root root 36 Mar 21 13:54 ethminer.amd.pcfg -> /opt/confs/default/ethminer.amd.pcfg
lrwxrwxrwx 1 root root 39 Mar 21 13:54 ethminer.nvidia.pcfg -> /opt/confs/default/ethminer.nvidia.pcfg
lrwxrwxrwx 1 root root 34 Mar 21 13:54 ewbf.zcash.pcfg -> /opt/confs/default/ewbf.zcash.pcfg
lrwxrwxrwx 1 root root 39 Sep 6 2017 nheqminer.zcash.pcfg -> /opt/confs/default/nheqminer.zcash.pcfg
lrwxrwxrwx 1 root root 36 Feb 4 02:57 nsgminer.neo.conf -> /opt/confs/default/nsgminer.neo.conf
lrwxrwxrwx 1 root root 46 Feb 4 02:57 nvidia.ccminer.lyra2v2.pcfg -> /opt/confs/default/nvidia.ccminer.lyra2v2.pcfg
lrwxrwxrwx 1 root root 42 Dec 11 00:49 optiminer.equihash.pcfg -> /opt/confs/default/optiminer.equihash.pcfg
lrwxrwxrwx 1 root root 28 Sep 6 2017 README.md -> /opt/confs/default/README.md
lrwxrwxrwx 1 root root 36 Sep 6 2017 sgminer.dash.conf -> /opt/confs/default/sgminer.dash.conf
lrwxrwxrwx 1 root root 35 Sep 6 2017 sgminer.eth.conf -> /opt/confs/default/sgminer.eth.conf
lrwxrwxrwx 1 root root 39 Sep 6 2017 sgminer.groestl.conf -> /opt/confs/default/sgminer.groestl.conf
lrwxrwxrwx 1 root root 36 Sep 6 2017 sgminer.lbry.conf -> /opt/confs/default/sgminer.lbry.conf
lrwxrwxrwx 1 root root 39 Mar 21 13:54 sgminer.lyra2v2.conf -> /opt/confs/default/sgminer.lyra2v2.conf
lrwxrwxrwx 1 root root 37 Sep 6 2017 sgminer.multi.conf -> /opt/confs/default/sgminer.multi.conf
lrwxrwxrwx 1 root root 38 Sep 6 2017 sgminer.pascal.conf -> /opt/confs/default/sgminer.pascal.conf
lrwxrwxrwx 1 root root 36 Sep 6 2017 sgminer.sigt.conf -> /opt/confs/default/sgminer.sigt.conf
lrwxrwxrwx 1 root root 38 Sep 6 2017 sgminer.x11evo.conf -> /opt/confs/default/sgminer.x11evo.conf
lrwxrwxrwx 1 root root 35 Oct 20 18:22 sgminer.xmr.conf -> /opt/confs/default/sgminer.xmr.conf
lrwxrwxrwx 1 root root 37 Sep 6 2017 sgminer.zcash.conf -> /opt/confs/default/sgminer.zcash.conf

ll /opt/miners

Which miners are compiled? This shows if there were any pimpups done to the miners themselves. May be necessary to pimpup a miner for good performance.

total 72
drwxr-xr-x 19 root root 12288 Dec 11 00:51 bfgminer
drwxr-xr-x 26 root root 4096 Dec 11 00:51 ccminer
drwxr-xr-x 9 root root 4096 Dec 11 00:51 cgminer
drwxr-xr-x 2 root root 4096 Feb 4 13:32 claymore-dual
drwxr-xr-x 2 root root 4096 Dec 11 00:30 claymore-xmr-amd
drwxr-xr-x 2 root root 4096 Dec 11 00:30 claymore-zcash-amd
drwxr-xr-x 13 root root 4096 Dec 11 00:51 cpuminer-multi
drwxr-xr-x 2 root root 4096 Mar 21 13:55 dstm
drwxr-xr-x 13 root root 4096 Dec 11 00:51 lbrycrd-gpu
drwxr-xr-x 10 root root 4096 Oct 21 11:21 nheqminer
drwxr-xr-x 2 root root 4096 Dec 10 23:55 nvidia-ewbf-zcash
drwxr-xr-x 8 root root 4096 Dec 11 00:51 optiminer-equihash
drwxr-xr-x 9 root root 4096 Dec 11 00:51 optiminer-zcash
drwxr-xr-x 13 root root 4096 Dec 11 00:51 sgminer
drwxr-xr-x 13 root root 4096 Dec 11 00:51 sgminer-pascal
drwxr-xr-x 14 root root 4096 Dec 11 00:51 sgminer-tpruvot

ll /opt/bins

Which kernel binary files have been created? This usually means the GPU will mine on that profile. Sometimes after a pimpup of a miner, you will need to run cleanbins command to remove these for good performance.

total 0

cat /root/gpuvars

Which gpuvars were modified? Need to make sure the environment variables needed for mining are intact.

export GPU_MAX_ALLOC_PERCENT=100
export GPU_USE_SYNC_OBJECTS=1
export GPU_MAX_HEAP_SIZE=100
export LANGUAGE=en_US.UTF-8
export LC_ALL=en_US.UTF-8
export PERL_JSON_BACKEND=0
export DISPLAY=:0
export GPU_FORCE_64BIT_PTR=1

cat /root/startup.sh

What startup parameters are you using? This may impact mining performance, fan speeds, and mining starting on boot.

#!/bin/bash
#
# ==================================================================
# .__
#______ |__| _____ ______ Portable Instant Mining Platform
#\____ \| |/ \____ \ PiMP
#| |_> > | Y Y \ |_> >
#| __/|__|__|_| / __/ Support: #PiMP on FreenodeIRC
#|__| \/|__| https://getPiMP.org
#
#
# Copyright (c) 2017 getPiMP.org. All Rights Reserved.
# Author: getPiMP.org
# License: This code is licensed for use with getPiMP.org only.
# Description: This is where you can change user-editable start up options.
# ==================================================================

#####################################################################
# INSTRUCTIONS - PLEASE READ
#####################################################################

# NOTE 1: How to edit this file.
# TO EDIT THIS FILE USE COMMAND: nano /etc/crontab
# IN GUI YOU CAN USE: leafpad /etc/crontab
# (edit command is just for the conf/pcfg!)

# NOTE 2: Absolute Paths
# In this file you have to specify absolute paths.
# Most of the pimp tools are in /opt/pimp.
# Examples: /opt/pimp/pimp --start 1
# /opt/minerfarm/minerfarm --start 1 (same effect)
# To determine what another tool uses for path you can do:
# which [command]
# e.g. which touch would output: /usr/bin/touch

# NOTE 3: This file is called by /etc/crontab upon boot.
# To schedule things on a regular basis (every 12 hours or every Friday at 5 PM),
# You would have to nano /etc/crontab directly.

# NOTE 4:
# If you get "permission denied" run: chmod +x /path/to/executable
# The file must be exectuable. Try running it by hand by typing it in.

# Thank you for reading the instructions.

#####################################################################
# GPU CONFIG
# Default: 20 seconds after boot, Set the fans to 60% as precaution.
#####################################################################

# Setup the clocks and fans according to what you edited
# Step 1: run this command manually: gputool --config
# it will make you a config file based on your current GPU setup.
#
# Step 2: nano /root/gpu-config.json
# put in what you want.

# Step 3: Run the gputool --config again and it will apply your values.

# Step 4: To have it run on boot, use this command. Timing is optimal
# for most GPUs.

sleep 40 && /opt/pimp/gputool --config --quiet

#####################################################################
# START MINING:
# Default: 25 seconds after boot, Start miner with ID 1
#####################################################################

sleep 125 && /opt/pimp/pimp --start 1

# Optional: Start other miners like CPU miner and ASIC
sleep 10 && yes | /opt/pimp/gputool --config
# sleep 35 && /opt/pimp/pimp --start 3

#####################################################################
# DISABLE GPU LEDs: This can save power or turn off lights if you want.
# OBVIOUSLY THIS IS FOR NVIDIA ONLY! NOT AMD.
# GPULogoBrightness can take a value from 0 to 100, this affects the
# brightness of the backlight.
# 0 - completely off, 100 - maximum brightness.
# Default: disabled, just remove the # to enable.
# If no GPU specified (like default) it will assign to all GPUs in the rig.
#####################################################################

#/usr/bin/nvidia-settings --assign GPULogoBrightness=0

#####################################################################
# USB LCD Displays
# Start the LCD display service. Optional, for USB LCD display support.
# These are for any "USB LCD device" commonly used with Raspi
# Example: https://www.adafruit.com/product/782
# The default will cycle through CPU Load, network, etc.
#####################################################################
# sleep 10 && systemctl LCDd start && sleep 10 && lcdproc

cat /root/gpu-config.json

What are the current fan/clock settings?

{
"comment": "Please see https://forum.getpimp.org for information about configuring this file",
"gpuSettings": [
{
"gpu_id": "0",
"NVCOffset": "120",
"NVMOffset": "650",
"NVPLimit": "130",
"fanspeed": "90",
"temptarget": "70"
},
{
"gpu_id": "1",
"NVCOffset": "120",
"NVMOffset": "650",
"NVPLimit": "130",
"fanspeed": "90",
"temptarget": "70"
},
{
"gpu_id": "2",
"NVCOffset": "120",
"NVMOffset": "650",
"NVPLimit": "130",
"fanspeed": "90",
"temptarget": "70"
},
{
"gpu_id": "3",
"NVCOffset": "120",
"NVMOffset": "650",
"NVPLimit": "130",
"fanspeed": "90",
"temptarget": "70"
},
{
"gpu_id": "4",
"NVCOffset": "120",
"NVMOffset": "650",
"NVPLimit": "130",
"fanspeed": "90",
"temptarget": "70"
},
{
"gpu_id": "5",
"NVCOffset": "120",
"NVMOffset": "650",
"NVPLimit": "130",
"fanspeed": "90",
"temptarget": "70"
},
{
"gpu_id": "6",
"NVCOffset": "120",
"NVMOffset": "650",
"NVPLimit": "130",
"fanspeed": "90",
"temptarget": "70"
},
{
"gpu_id": "7",
"NVCOffset": "120",
"NVMOffset": "650",
"NVPLimit": "130",
"fanspeed": "90",
"temptarget": "70"
},
{
"gpu_id": "8",
"NVCOffset": "120",
"NVMOffset": "650",
"NVPLimit": "130",
"fanspeed": "90",
"temptarget": "70"
},
{
"gpu_id": "9",
"NVCOffset": "120",
"NVMOffset": "650",
"NVPLimit": "130",
"fanspeed": "90",
"temptarget": "70"
},
{
"gpu_id": "10",
"NVCOffset": "120",
"NVMOffset": "650",
"NVPLimit": "130",
"fanspeed": "90",
"temptarget": "70"
},
{
"gpu_id": "11",
"NVCOffset": "120",
"NVMOffset": "650",
"NVPLimit": "130",
"fanspeed": "90",
"temptarget": "70"
}
]
}

PiMP Software and Services

ll /opt/pimp

What do the pimp software files look like?

total 5612
drwxr-xr-x 2 root root 4096 Nov 16 20:42 amdmeminfo
-rwxr-xr-x 1 root root 1540944 Oct 10 18:36 atiflash
-rwxr-xr-x 1 pimp pimp 59110 Mar 21 14:57 bootdetect
drwxr-xr-x 5 root root 4096 Dec 12 12:30 go
-rwxr-xr-x 1 root root 307544 Mar 21 14:57 gputool
-rwxr-xr-x 1 root root 120900 Mar 21 14:57 helpme
-rw-r--r-- 1 root root 3690 Mar 21 14:57 newpimp.txt
-rwxr-xr-x 1 root root 2879912 Oct 21 14:06 nvflash
drwxr-xr-x 2 root root 4096 Sep 6 2017 ohgodatool
-rwxr-xr-x 1 root root 403669 Mar 21 14:57 pimp
-rwxr-xr-x 1 root root 117238 Mar 21 14:57 pimpkey
-rw-r--r-- 1 root root 14223 Mar 21 13:53 pimpminers.conf
-rwxr-xr-x 1 root root 261516 Mar 21 13:53 pimpup
drwxr-xr-x 3 root root 4096 Dec 13 19:31 PolarisBiosEditor

ll /opt/minerfarm

What do the minerfarm software files look like?

total 1096
drwxr-xr-x 2 root root 4096 Sep 6 2017 lib
-rwxr-xr-x 1 root root 569299 Mar 21 14:57 minerfarm
-rwxr-xr-x 1 pimp pimp 541615 Mar 21 14:57 minerfarm_svc
-rw-r--r-- 1 root root 2809 Jul 28 2017 profiles.txt

cat /etc/crontab

What cron entries were modified? Just checking what you have on startup and if you are properly calling /root/startup.sh.

# /etc/crontab: system-wide crontab
# Unlike any other crontab you don't have to run the `crontab'
# command to install the new version when you edit this file
# and files in /etc/cron.d. These files also have username fields,
# that none of the other crontabs do.

SHELL=/bin/sh
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin

#####################################################################
# HOW TO SCHEDULE JOBS IN CRONTAB:
#####################################################################

# +---------------- minute (0 - 59)
# | +------------- hour (0 - 23)
# | | +---------- day of month (1 - 31)
# | | | +------- month (1 - 12)
# | | | | +---- day of week (0 - 6) (Sunday=0)
# | | | | |
# * * * * * command to be executed

# In other words:
# 1. Minute when the process will be started [0-60]
# 2. Hour when the process will be started [0-23]
# 3. Day of the month when the process will be started [1-28/29/30/31]
# 4. Month of the year when the process will be started [1-12]
# 5. Weekday when the process will be started [0-6] [0 is Sunday]

# FOR INTERVALS:
# Use the division bar (slash) to divide it up.
# all x min = */x
# example: 0/15 in minute column would be every 15 minutes.

# 5 8 * * 0 will run the job every sunday at 8:05 am.

# For more information and a neat calculator, see https://crontab.guru/

#####################################################################
# USER EDITABLE SETTINGS
# Use: nano /root/startup.sh to change your boot settings.
#
#####################################################################

# COMMANDS RUN ON BOOT UP:
# To run scripts on reboot, use: @reboot root /path/to/executable
# If you get "permission denied" run: chmod +x /path/to/executable
# It is best to edit the on-boot stuff with: nano /root/startup.sh

@reboot root /root/startup.sh

# COMMANDS RUN ON A SCHEDULE:

# Reboot automatically every 6 or 12 hours:
# 0 /6 * * * sync && echo b > /proc/sysrq-trigger
# 0 /12 * * * sync && echo b > /proc/sysrq-trigger

# This will reboot at 1 AM Zulu (Rig local time):
# 0 1 * * * sync && echo b > /proc/sysrq-trigger



#####################################################################
# DO NOT EDIT BELOW THIS LINE
#####################################################################
# m h dom mon dow user command
17 * * * * root cd / && run-parts --report /etc/cron.hourly
25 6 * * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily )
47 6 * * 7 root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.weekly )
52 6 1 * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.monthly )

minerfarm service

(( Is minerfarm agent service running? If it is not running, try: systemctl start minerfarm, or minerfarm and then use 'o' to start.))
● minerfarm.service - Service process for miner.farm agent
Loaded: loaded (/etc/systemd/system/minerfarm.service; enabled; vendor preset: enabled)
Active: active (running) since Wed 2018-03-21 15:08:26 EDT; 3min 13s ago
Process: 580 ExecStart=/opt/minerfarm/minerfarm_svc (code=exited, status=0/SUCCESS)
Main PID: 732 (minerfarm_svc)
CGroup: /system.slice/minerfarm.service
└─732 /usr/bin/perl /opt/minerfarm/minerfarm_svc

Mar 21 15:08:21 pimp2 systemd[1]: Starting Service process for miner.farm agent...
Mar 21 15:08:26 pimp2 systemd[1]: Started Service process for miner.farm agent.

pimp vnc service

Is the remote vnc desktop service running? If not, RDP and VNC will not work.

● pimpvnc.service - PiMP VNC Service
Loaded: loaded (/etc/systemd/user/pimpvnc.service; enabled; vendor preset: enabled)
Active: active (running) since Wed 2018-03-21 15:09:16 EDT; 2min 23s ago
Main PID: 1994 (x11vnc)
CGroup: /user.slice/user-0.slice/user@0.service/pimpvnc.service
└─1994 /usr/bin/x11vnc -v -display :0 -auth /var/run/lightdm/root/\:0 -nopw -logappend /var/log/pimpvnc.log

Mar 21 15:09:16 pimp2 systemd[992]: Started PiMP VNC Service.
Mar 21 15:09:16 pimp2 x11vnc[1994]: PORT=5900

lightdm service

Is the desktop GUI service running? If this is not running you will not get GUI/RDP/VNC access, and may not

● lightdm.service - Light Display Manager
Loaded: loaded (/lib/systemd/system/lightdm.service; enabled; vendor preset: enabled)
Active: active (running) since Wed 2018-03-21 15:08:22 EDT; 3min 17s ago
Docs: man:lightdm(1)
Process: 545 ExecStartPre=/bin/sh -c [ "$(basename $(cat /etc/X11/default-display-manager 2>/dev/null))" = "lightdm" ] (code=exited, status=0/SUCCESS)
Main PID: 554 (lightdm)
CGroup: /system.slice/lightdm.service
├─554 /usr/sbin/lightdm
└─593 /usr/lib/xorg/Xorg -core :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch

Mar 21 15:08:18 pimp2 systemd[1]: Starting Light Display Manager...
Mar 21 15:08:22 pimp2 systemd[1]: Started Light Display Manager.
Mar 21 15:09:14 pimp2 lightdm[1868]: pam_unix(lightdm-autologin:session): session opened for user root by (uid=0)

GPU Info

lspci -v | grep VGA

What GPUs are seen by the PCI subsystem? This is Linux physically detecting the GPUs.

01:00.0 VGA compatible controller: NVIDIA Corporation GP104 [GeForce GTX 1070] (rev a1) (prog-if 00 [VGA controller])
03:00.0 VGA compatible controller: NVIDIA Corporation GP104 [GeForce GTX 1070] (rev a1) (prog-if 00 [VGA controller])
04:00.0 VGA compatible controller: NVIDIA Corporation GP104 [GeForce GTX 1070] (rev a1) (prog-if 00 [VGA controller])
05:00.0 VGA compatible controller: NVIDIA Corporation GP104 [GeForce GTX 1070] (rev a1) (prog-if 00 [VGA controller])
06:00.0 VGA compatible controller: NVIDIA Corporation GP104 [GeForce GTX 1070] (rev a1) (prog-if 00 [VGA controller])
09:00.0 VGA compatible controller: NVIDIA Corporation GP104 [GeForce GTX 1070] (rev a1) (prog-if 00 [VGA controller])
0a:00.0 VGA compatible controller: NVIDIA Corporation GP104 [GeForce GTX 1070] (rev a1) (prog-if 00 [VGA controller])
0b:00.0 VGA compatible controller: NVIDIA Corporation GP104 [GeForce GTX 1070 Ti] (rev a1) (prog-if 00 [VGA controller])
0c:00.0 VGA compatible controller: NVIDIA Corporation GP104 [GeForce GTX 1070] (rev a1) (prog-if 00 [VGA controller])
0d:00.0 VGA compatible controller: NVIDIA Corporation GP104 [GeForce GTX 1070] (rev a1) (prog-if 00 [VGA controller])
0e:00.0 VGA compatible controller: NVIDIA Corporation GP104 [GeForce GTX 1070] (rev a1) (prog-if 00 [VGA controller])
0f:00.0 VGA compatible controller: NVIDIA Corporation GP104 [GeForce GTX 1070] (rev a1) (prog-if 00 [VGA controller])

gputool --status

What GPUs are seen by the PIMP GPUTOOL SYSFS subsystem? AMDGPU cards only.

PIMP GPU Tool v20180220
GPUs type: NVI
NOTE: At least one miner appears to be running.
GPU 0: nVidia GeForce GTX 1070, Temp: 39C, Fan: 90%, Core Clock: 1923 Mhz (120 Offset), Memory Clock: 810 Mhz (650 Offset), Performance state: 8, Power Usage: 10.3W (130W Max)
GPU 1: nVidia GeForce GTX 1070, Temp: 32C, Fan: 90%, Core Clock: 139 Mhz (120 Offset), Memory Clock: 405 Mhz (650 Offset), Performance state: 8, Power Usage: 9.6W (130W Max)
GPU 2: nVidia GeForce GTX 1070, Temp: 32C, Fan: 90%, Core Clock: 139 Mhz (120 Offset), Memory Clock: 4131 Mhz (650 Offset), Performance state: 2, Power Usage: 131.1W (130W Max)
GPU 3: nVidia GeForce GTX 1070, Temp: 35C, Fan: 90%, Core Clock: 1936 Mhz (120 Offset), Memory Clock: 4131 Mhz (650 Offset), Performance state: 2, Power Usage: 128.7W (130W Max)
GPU 4: nVidia GeForce GTX 1070, Temp: 35C, Fan: 90%, Core Clock: 1923 Mhz (120 Offset), Memory Clock: 4131 Mhz (650 Offset), Performance state: 2, Power Usage: 132.5W (130W Max)
GPU 5: nVidia GeForce GTX 1070, Temp: 49C, Fan: 90%, Core Clock: 1771 Mhz (120 Offset), Memory Clock: 4131 Mhz (650 Offset), Performance state: 2, Power Usage: 131.6W (130W Max)
GPU 6: nVidia GeForce GTX 1070, Temp: 41C, Fan: 90%, Core Clock: 1911 Mhz (120 Offset), Memory Clock: 4131 Mhz (650 Offset), Performance state: 2, Power Usage: 129.5W (130W Max)
GPU 7: nVidia GeForce GTX 1070 Ti, Temp: 43C, Fan: 90%, Core Clock: 1708 Mhz (120 Offset), Memory Clock: 4131 Mhz (650 Offset), Performance state: 2, Power Usage: 131.0W (130W Max)
GPU 8: nVidia GeForce GTX 1070, Temp: 52C, Fan: 90%, Core Clock: 1784 Mhz (120 Offset), Memory Clock: 4131 Mhz (650 Offset), Performance state: 2, Power Usage: 128.3W (130W Max)
GPU 9: nVidia GeForce GTX 1070, Temp: 43C, Fan: 90%, Core Clock: 1898 Mhz (120 Offset), Memory Clock: 4131 Mhz (650 Offset), Performance state: 2, Power Usage: 128.6W (130W Max)
GPU 10: nVidia GeForce GTX 1070, Temp: 44C, Fan: 90%, Core Clock: 1898 Mhz (120 Offset), Memory Clock: 4131 Mhz (650 Offset), Performance state: 2, Power Usage: 132.1W (130W Max)
GPU 11: nVidia GeForce GTX 1070, Temp: 45C, Fan: 90%, Core Clock: 1911 Mhz (120 Offset), Memory Clock: 4131 Mhz (650 Offset), Performance state: 2, Power Usage: 126.6W (130W Max)

/opt/pimp/atiflash -ai

Is atiflash seeing the GPUs? FGLRX/AMDGPU cards only.

Adapter not found

amdmeminfo

Is amdmeminfo seeing the GPUs? FGLRX/AMDGPU cards only.

AMDMemInfo by Zuikkis
Updated by Yann St.Arnaud

***** /opt/miners/sgminer/sgminer -n *****

Is sgminer seeing the GPUs? Very important. If sgminer sees your GPUs, then mining should work with the default profiles. Most likely if your GPUs are seen here but mining is not working, it is a conf error, network or pool issue.. Try default conf with del command, or use pimp --debug 1 to look at the miner screen directly in the debug mode to get more information.

[15:16:44] CL Platform vendor: NVIDIA Corporation
[15:16:44] CL Platform name: NVIDIA CUDA
[15:16:44] CL Platform version: OpenCL 1.2 CUDA 9.1.84
[15:16:44] Platform devices: 12
[15:16:44] 0 GeForce GTX 1070 Ti
[15:16:44] 1 GeForce GTX 1070
[15:16:44] 2 GeForce GTX 1070
[15:16:44] 3 GeForce GTX 1070
[15:16:44] 4 GeForce GTX 1070
[15:16:44] 5 GeForce GTX 1070
[15:16:44] 6 GeForce GTX 1070
[15:16:44] 7 GeForce GTX 1070
[15:16:44] 8 GeForce GTX 1070
[15:16:44] 9 GeForce GTX 1070
[15:16:44] 10 GeForce GTX 1070
[15:16:44] 11 GeForce GTX 1070
[15:16:44] Number of ADL devices: 12
[15:16:44] Unable to load ATI ADL library.
[15:16:44] 12 GPU devices max detected

/opt/miners/optiminer-zcash/optiminer-zcash --list-devices

Is optiminer seeing the GPUs? AMDGPU/FGLRX only, same basic thoughts as sgminer above.

[2018-03-21 15:16:44.982] [info] Optiminer/Zcash 1.7.0 (C) Optiminer 2017
Platform (-c) 0, Device (-d) 0:
Platform Vendor: Nvidia
Device Name: GeForce GTX 1070 Ti
Driver Version: 390.25
Address bits: 64
Available memory: 8513978368
Platform (-c) 0, Device (-d) 1:
Platform Vendor: Nvidia
Device Name: GeForce GTX 1070
Driver Version: 390.25
Address bits: 64
Available memory: 8511881216
Platform (-c) 0, Device (-d) 2:
Platform Vendor: Nvidia
Device Name: GeForce GTX 1070
Driver Version: 390.25
Address bits: 64
Available memory: 8513978368
Platform (-c) 0, Device (-d) 3:
Platform Vendor: Nvidia
Device Name: GeForce GTX 1070
Driver Version: 390.25
Address bits: 64
Available memory: 8513978368
Platform (-c) 0, Device (-d) 4:
Platform Vendor: Nvidia
Device Name: GeForce GTX 1070
Driver Version: 390.25
Address bits: 64
Available memory: 8513978368
Platform (-c) 0, Device (-d) 5:
Platform Vendor: Nvidia
Device Name: GeForce GTX 1070
Driver Version: 390.25
Address bits: 64
Available memory: 8513978368
Platform (-c) 0, Device (-d) 6:
Platform Vendor: Nvidia
Device Name: GeForce GTX 1070
Driver Version: 390.25
Address bits: 64
Available memory: 8513978368
Platform (-c) 0, Device (-d) 7:
Platform Vendor: Nvidia
Device Name: GeForce GTX 1070
Driver Version: 390.25
Address bits: 64
Available memory: 8513978368
Platform (-c) 0, Device (-d) 8:
Platform Vendor: Nvidia
Device Name: GeForce GTX 1070
Driver Version: 390.25
Address bits: 64
Available memory: 8513978368
Platform (-c) 0, Device (-d) 9:
Platform Vendor: Nvidia
Device Name: GeForce GTX 1070
Driver Version: 390.25
Address bits: 64
Available memory: 8513978368
Platform (-c) 0, Device (-d) 10:
Platform Vendor: Nvidia
Device Name: GeForce GTX 1070
Driver Version: 390.25
Address bits: 64
Available memory: 8513978368
Platform (-c) 0, Device (-d) 11:
Platform Vendor: Nvidia
Device Name: GeForce GTX 1070
Driver Version: 390.25
Address bits: 64
Available memory: 8513978368

nvidia-smi

Is nvidia-smi seeing the GPUs? This is the main overclocking and admin tool for NVIDIA GPUs. If this looks good it is highly likely you will successfully mine.

Wed Mar 21 15:16:46 2018
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 390.25 Driver Version: 390.25 |
|-------------------------------+----------------------+----------------------+
| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. |
|===============================+======================+======================|
| 0 GeForce GTX 1070 On | 00000000:01:00.0 Off | N/A |
| 90% 50C P2 131W / 130W | 566MiB / 8117MiB | 100% Default |
+-------------------------------+----------------------+----------------------+
| 1 GeForce GTX 1070 On | 00000000:03:00.0 Off | N/A |
| 90% 46C P2 131W / 130W | 534MiB / 8119MiB | 100% Default |
+-------------------------------+----------------------+----------------------+
| 2 GeForce GTX 1070 On | 00000000:04:00.0 Off | N/A |
| 90% 47C P2 131W / 130W | 534MiB / 8119MiB | 100% Default |
+-------------------------------+----------------------+----------------------+
| 3 GeForce GTX 1070 On | 00000000:05:00.0 Off | N/A |
| 90% 45C P2 132W / 130W | 534MiB / 8119MiB | 100% Default |
+-------------------------------+----------------------+----------------------+
| 4 GeForce GTX 1070 On | 00000000:06:00.0 Off | N/A |
| 90% 38C P2 129W / 130W | 534MiB / 8119MiB | 100% Default |
+-------------------------------+----------------------+----------------------+
| 5 GeForce GTX 1070 On | 00000000:09:00.0 Off | N/A |
| 90% 57C P2 129W / 130W | 534MiB / 8119MiB | 100% Default |
+-------------------------------+----------------------+----------------------+
| 6 GeForce GTX 1070 On | 00000000:0A:00.0 Off | N/A |
| 90% 44C P2 130W / 130W | 534MiB / 8119MiB | 100% Default |
+-------------------------------+----------------------+----------------------+
| 7 GeForce GTX 107... On | 00000000:0B:00.0 Off | N/A |
| 90% 44C P2 132W / 130W | 556MiB / 8119MiB | 100% Default |
+-------------------------------+----------------------+----------------------+
| 8 GeForce GTX 1070 On | 00000000:0C:00.0 Off | N/A |
| 90% 53C P2 128W / 130W | 534MiB / 8119MiB | 100% Default |
+-------------------------------+----------------------+----------------------+
| 9 GeForce GTX 1070 On | 00000000:0D:00.0 Off | N/A |
| 90% 44C P2 128W / 130W | 534MiB / 8119MiB | 100% Default |
+-------------------------------+----------------------+----------------------+
| 10 GeForce GTX 1070 On | 00000000:0E:00.0 Off | N/A |
| 90% 45C P2 130W / 130W | 534MiB / 8119MiB | 100% Default |
+-------------------------------+----------------------+----------------------+
| 11 GeForce GTX 1070 On | 00000000:0F:00.0 Off | N/A |
| 90% 45C P2 126W / 130W | 534MiB / 8119MiB | 100% Default |
+-------------------------------+----------------------+----------------------+

+-----------------------------------------------------------------------------+
| Processes: GPU Memory |
| GPU PID Type Process name Usage |
|=============================================================================|
| 0 593 G /usr/lib/xorg/Xorg 44MiB |
| 0 7076 C /opt/miners/dstm/dstm-miner 509MiB |
| 1 593 G /usr/lib/xorg/Xorg 12MiB |
| 1 7076 C /opt/miners/dstm/dstm-miner 509MiB |
| 2 593 G /usr/lib/xorg/Xorg 12MiB |
| 2 7076 C /opt/miners/dstm/dstm-miner 509MiB |
| 3 593 G /usr/lib/xorg/Xorg 12MiB |
| 3 7076 C /opt/miners/dstm/dstm-miner 509MiB |
| 4 593 G /usr/lib/xorg/Xorg 12MiB |
| 4 7076 C /opt/miners/dstm/dstm-miner 509MiB |
| 5 593 G /usr/lib/xorg/Xorg 12MiB |
| 5 7076 C /opt/miners/dstm/dstm-miner 509MiB |
| 6 593 G /usr/lib/xorg/Xorg 12MiB |
| 6 7076 C /opt/miners/dstm/dstm-miner 509MiB |
| 7 593 G /usr/lib/xorg/Xorg 12MiB |
| 7 7076 C /opt/miners/dstm/dstm-miner 531MiB |
| 8 593 G /usr/lib/xorg/Xorg 12MiB |
| 8 7076 C /opt/miners/dstm/dstm-miner 509MiB |
| 9 593 G /usr/lib/xorg/Xorg 12MiB |
| 9 7076 C /opt/miners/dstm/dstm-miner 509MiB |
| 10 593 G /usr/lib/xorg/Xorg 12MiB |
| 10 7076 C /opt/miners/dstm/dstm-miner 509MiB |
| 11 593 G /usr/lib/xorg/Xorg 12MiB |
| 11 7076 C /opt/miners/dstm/dstm-miner 509MiB |
+-----------------------------------------------------------------------------+

nVidia Power use

What kind of power are the nVidia GPUs drawing?


==============NVSMI LOG==============

Timestamp : Wed Mar 21 15:16:47 2018
Driver Version : 390.25

Attached GPUs : 12
GPU 00000000:01:00.0
Power Readings
Power Management : Supported
Power Draw : 132.89 W
Power Limit : 130.00 W
Default Power Limit : 166.10 W
Enforced Power Limit : 130.00 W
Min Power Limit : 75.00 W
Max Power Limit : 200.00 W
Power Samples
Duration : 2.39 sec
Number of Samples : 119
Max : 134.91 W
Min : 121.95 W
Avg : 129.58 W

GPU 00000000:03:00.0
Power Readings
Power Management : Supported
Power Draw : 129.68 W
Power Limit : 130.00 W
Default Power Limit : 166.10 W
Enforced Power Limit : 130.00 W
Min Power Limit : 75.00 W
Max Power Limit : 200.00 W
Power Samples
Duration : 2.38 sec
Number of Samples : 119
Max : 132.68 W
Min : 124.84 W
Avg : 129.43 W

GPU 00000000:04:00.0
Power Readings
Power Management : Supported
Power Draw : 130.72 W
Power Limit : 130.00 W
Default Power Limit : 166.10 W
Enforced Power Limit : 130.00 W
Min Power Limit : 75.00 W
Max Power Limit : 200.00 W
Power Samples
Duration : 2.38 sec
Number of Samples : 119
Max : 133.66 W
Min : 126.60 W
Avg : 129.46 W

GPU 00000000:05:00.0
Power Readings
Power Management : Supported
Power Draw : 129.48 W
Power Limit : 130.00 W
Default Power Limit : 166.10 W
Enforced Power Limit : 130.00 W
Min Power Limit : 75.00 W
Max Power Limit : 200.00 W
Power Samples
Duration : 2.38 sec
Number of Samples : 119
Max : 133.63 W
Min : 126.57 W
Avg : 129.68 W

GPU 00000000:06:00.0
Power Readings
Power Management : Supported
Power Draw : 129.16 W
Power Limit : 130.00 W
Default Power Limit : 166.10 W
Enforced Power Limit : 130.00 W
Min Power Limit : 75.00 W
Max Power Limit : 200.00 W
Power Samples
Duration : 2.38 sec
Number of Samples : 119
Max : 131.21 W
Min : 127.35 W
Avg : 129.65 W

GPU 00000000:09:00.0
Power Readings
Power Management : Supported
Power Draw : 126.32 W
Power Limit : 130.00 W
Default Power Limit : 151.00 W
Enforced Power Limit : 130.00 W
Min Power Limit : 75.00 W
Max Power Limit : 170.00 W
Power Samples
Duration : 2.37 sec
Number of Samples : 119
Max : 132.18 W
Min : 125.46 W
Avg : 129.46 W

GPU 00000000:0A:00.0
Power Readings
Power Management : Supported
Power Draw : 127.83 W
Power Limit : 130.00 W
Default Power Limit : 166.10 W
Enforced Power Limit : 130.00 W
Min Power Limit : 75.00 W
Max Power Limit : 200.00 W
Power Samples
Duration : 2.37 sec
Number of Samples : 119
Max : 131.26 W
Min : 126.76 W
Avg : 129.53 W

GPU 00000000:0B:00.0
Power Readings
Power Management : Supported
Power Draw : 129.39 W
Power Limit : 130.00 W
Default Power Limit : 180.00 W
Enforced Power Limit : 130.00 W
Min Power Limit : 90.00 W
Max Power Limit : 217.00 W
Power Samples
Duration : 2.38 sec
Number of Samples : 119
Max : 133.67 W
Min : 126.91 W
Avg : 129.57 W

GPU 00000000:0C:00.0
Power Readings
Power Management : Supported
Power Draw : 127.63 W
Power Limit : 130.00 W
Default Power Limit : 151.00 W
Enforced Power Limit : 130.00 W
Min Power Limit : 75.00 W
Max Power Limit : 170.00 W
Power Samples
Duration : 2.40 sec
Number of Samples : 119
Max : 132.33 W
Min : 126.22 W
Avg : 129.30 W

GPU 00000000:0D:00.0
Power Readings
Power Management : Supported
Power Draw : 128.92 W
Power Limit : 130.00 W
Default Power Limit : 166.10 W
Enforced Power Limit : 130.00 W
Min Power Limit : 75.00 W
Max Power Limit : 200.00 W
Power Samples
Duration : 2.38 sec
Number of Samples : 119
Max : 133.15 W
Min : 126.01 W
Avg : 129.26 W

GPU 00000000:0E:00.0
Power Readings
Power Management : Supported
Power Draw : 128.03 W
Power Limit : 130.00 W
Default Power Limit : 166.10 W
Enforced Power Limit : 130.00 W
Min Power Limit : 75.00 W
Max Power Limit : 200.00 W
Power Samples
Duration : 2.38 sec
Number of Samples : 119
Max : 133.49 W
Min : 122.08 W
Avg : 128.95 W

GPU 00000000:0F:00.0
Power Readings
Power Management : Supported
Power Draw : 129.16 W
Power Limit : 130.00 W
Default Power Limit : 166.10 W
Enforced Power Limit : 130.00 W
Min Power Limit : 75.00 W
Max Power Limit : 200.00 W
Power Samples
Duration : 2.39 sec
Number of Samples : 119
Max : 132.94 W
Min : 124.80 W
Avg : 129.56 W

xrandr -q

What information does Xorg have?

Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
DVI-D-0 disconnected primary (normal left inverted right x axis y axis)
HDMI-0 disconnected (normal left inverted right x axis y axis)
HDMI-1 disconnected (normal left inverted right x axis y axis)
DP-0 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
DP-3 disconnected (normal left inverted right x axis y axis)

Hardware Info

Disk SMART Data for /dev/sda

What is the status of the boot disk? Errors or Reallocated Sectors means the disk should be replaced immediately.

smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.15.0-pimp-cheesesteak] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 5400.6
Device Model: ST9500325AS
Serial Number: 5VE9FDGW
LU WWN Device Id: 5 000c50 02188cf4c
Firmware Version: 0002SDM1
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Wed Mar 21 15:16:48 2018 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 143) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 115 099 006 Pre-fail Always - 196682928
3 Spin_Up_Time 0x0003 099 098 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2532
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 1
7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 260094934
9 Power_On_Hours 0x0032 079 079 000 Old_age Always - 18536
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 098 037 020 Old_age Always - 2453
184 End-to-End_Error 0x0032 001 001 099 Old_age Always FAILING_NOW 791
187 Reported_Uncorrect 0x0032 089 089 000 Old_age Always - 11
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 51540459543
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 072 037 045 Old_age Always In_the_past 28 (0 235 30 26 0)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 30
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 104
193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 430646
194 Temperature_Celsius 0x0022 028 063 000 Old_age Always - 28 (0 14 0 0 0)
195 Hardware_ECC_Recovered 0x001a 053 044 000 Old_age Always - 196682928
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0

SMART Error Log Version: 1
ATA Error Count: 18 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 18 occurred at disk power-on lifetime: 18533 hours (772 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 e6 1b 5f 00 Error: UNC at LBA = 0x005f1be6 = 6233062

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 e0 1b 5f e0 00 00:16:42.229 READ DMA EXT
25 00 01 00 08 00 e0 00 00:16:42.155 READ DMA EXT
25 00 08 d8 17 5f e0 00 00:16:39.848 READ DMA EXT
25 00 08 d0 17 5f e0 00 00:16:39.841 READ DMA EXT
25 00 08 30 f7 5e e0 00 00:16:39.839 READ DMA EXT

Error 17 occurred at disk power-on lifetime: 18533 hours (772 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 e6 1b 5f 00 Error: UNC at LBA = 0x005f1be6 = 6233062

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 d8 17 5f e0 00 00:16:39.848 READ DMA EXT
25 00 08 d0 17 5f e0 00 00:16:39.841 READ DMA EXT
25 00 08 30 f7 5e e0 00 00:16:39.839 READ DMA EXT
25 00 08 38 f7 5e e0 00 00:16:39.838 READ DMA EXT
25 00 08 28 f7 5e e0 00 00:16:39.837 READ DMA EXT

Error 16 occurred at disk power-on lifetime: 18506 hours (771 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 71 04 81 87 80 e0

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
e0 00 00 00 00 00 a0 00 13:54:52.925 STANDBY IMMEDIATE
e7 00 00 00 00 00 a0 00 13:54:52.759 FLUSH CACHE
39 00 08 00 5d 78 e1 00 13:54:52.759 WRITE MULTIPLE EXT
39 00 08 00 5d 78 e1 00 13:54:52.758 WRITE MULTIPLE EXT
39 00 08 00 5d 78 e1 00 13:54:52.757 WRITE MULTIPLE EXT

Error 15 occurred at disk power-on lifetime: 18506 hours (771 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 71 04 81 87 80 e0 Device Fault; Error: ABRT 4 sectors at LBA = 0x00808781 = 8423297

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
35 00 08 00 5d 78 e1 00 13:54:52.754 WRITE DMA EXT
35 00 60 d8 54 78 e1 00 13:54:52.610 WRITE DMA EXT
35 00 08 80 4a 78 e1 00 13:54:49.125 WRITE DMA EXT
35 00 08 b0 40 78 e1 00 13:54:46.851 WRITE DMA EXT
35 00 08 a8 40 78 e1 00 13:54:46.809 WRITE DMA EXT

Error 14 occurred at disk power-on lifetime: 18506 hours (771 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 71 04 81 87 80 e0 Device Fault; Error: ABRT 4 sectors at LBA = 0x00808781 = 8423297

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
35 00 60 d8 54 78 e1 00 13:54:52.610 WRITE DMA EXT
35 00 08 80 4a 78 e1 00 13:54:49.125 WRITE DMA EXT
35 00 08 b0 40 78 e1 00 13:54:46.851 WRITE DMA EXT
35 00 08 a8 40 78 e1 00 13:54:46.809 WRITE DMA EXT
c6 00 10 00 00 00 a0 00 13:54:46.808 SET MULTIPLE MODE

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Conveyance offline Completed without error 00% 13016 -
# 2 Conveyance offline Completed without error 00% 13016 -
# 3 Short offline Completed without error 00% 13016 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Chassis Temps

How are the system temperatures?

pch_skylake-virtual-0
Adapter: Virtual device
temp1: +30.0°C

coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +43.0°C (high = +80.0°C, crit = +100.0°C)
Core 0: +37.0°C (high = +80.0°C, crit = +100.0°C)
Core 1: +43.0°C (high = +80.0°C, crit = +100.0°C)

Logs

tail -50 /var/log/agent.log

Log for minerfarm agent.

[PID] 2018-03-21 17:52:01Z: (FCTRL) local IP is 192.168.1.15.
[PID] 2018-03-21 17:54:14Z: (FCTRL) service STOPPED. Interrupted system call
[PID] 2018-03-21 17:54:14Z: (FCTRL) service started.
[PID] 2018-03-21 17:54:14Z: (FCTRL) local IP is 192.168.1.15.
[PID] 2018-03-21 17:59:55Z: (FCTRL) service started.
[PID] 2018-03-21 17:59:56Z: (FCTRL) local IP is 192.168.1.15.
[PID] 2018-03-21 18:02:34Z: Starting command line miner on localhost
bin: dstm-miner
conf: dstm.equihash.pcfg
[PID] 2018-03-21 18:02:34Z: Using port 4028...
[PID] 2018-03-21 18:02:36Z: Miner screen started...
[PID] 2018-03-21 18:03:16Z: (CLI user) Miner stopped.
[PID] 2018-03-21 18:04:58Z: (CLI user) Starting command line miner on localhost
bin: dstm-miner
conf: dstm.equihash.pcfg
[PID] 2018-03-21 18:04:58Z: (CLI user) Using port 4028...
[PID] 2018-03-21 18:05:00Z: (CLI user) Miner screen started...
[PID] 2018-03-21 18:09:25Z: (FCTRL) service STOPPED. Interrupted system call
[PID] 2018-03-21 18:09:25Z: (FCTRL) service started.
[PID] 2018-03-21 18:09:25Z: (FCTRL) local IP is 192.168.1.15.
[PID] 2018-03-21 18:10:33Z: (FCTRL) service started.
[PID] 2018-03-21 18:10:33Z: (FCTRL) local IP is 192.168.1.15.
[PID] 2018-03-21 18:13:13Z: Starting command line miner on localhost
bin: dstm-miner
conf: dstm.equihash.pcfg
[PID] 2018-03-21 18:13:13Z: Using port 4028...
[PID] 2018-03-21 18:13:15Z: Miner screen started...
[PID] 2018-03-21 18:57:11Z: (FCTRL) service STOPPED. Interrupted system call
[PID] 2018-03-21 18:57:11Z: (FCTRL) service started.
[PID] 2018-03-21 18:57:11Z: (FCTRL) local IP is 192.168.1.15.
[PID] 2018-03-21 19:02:58Z: (FCTRL) service started.
[PID] 2018-03-21 19:02:58Z: (FCTRL) local IP is 192.168.1.15.
[PID] 2018-03-21 19:05:37Z: Starting command line miner on localhost
bin: dstm-miner
conf: dstm.equihash.pcfg
[PID] 2018-03-21 19:05:37Z: Using port 4028...
[PID] 2018-03-21 19:05:39Z: Miner screen started...
[PID] 2018-03-21 19:08:26Z: (FCTRL) service started.
[PID] 2018-03-21 19:08:26Z: (FCTRL) local IP is 192.168.1.15.
[PID] 2018-03-21 19:11:05Z: Starting command line miner on localhost
bin: dstm-miner
conf: dstm.equihash.pcfg
[PID] 2018-03-21 19:11:05Z: Using port 4028...
[PID] 2018-03-21 19:11:07Z: Miner screen started...
[PID] 2018-03-21 19:11:47Z: (CLI user) Miner stopped.
[PID] 2018-03-21 19:12:28Z: (CLI user) Starting command line miner on localhost
bin: dstm-miner
conf: dstm.equihash.pcfg
[PID] 2018-03-21 19:12:28Z: (CLI user) Using port 4028...
[PID] 2018-03-21 19:12:31Z: (CLI user) Miner screen started...

tail -50 /var/log/miner.log

Pimp unified miner logging of the miner instances.

tail -20 /var/log/pimpup.log

Log of pimpup updates.

[2018-Mar-21-13:53:31] Started PIMPUp v20180116 =======
[2018-Mar-21-13:53:32] PIMPUp version out of date
[2018-Mar-21-13:53:34] PIMPUp updated
[2018-Mar-21-13:54:10] Started PIMPUp v20180215 =======
[2018-Mar-21-13:54:11] PIMPUp version is current
[2018-Mar-21-13:54:12] PIMP SW version out of date
[2018-Mar-21-13:54:14] PIMP SW updated
[2018-Mar-21-13:54:49] Updated default conf files
[2018-Mar-21-13:55:03] Started update for 252
[2018-Mar-21-13:55:07] Update succeeded for 252
[2018-Mar-21-14:09:21] Started PIMPUp v20180215 =======
[2018-Mar-21-14:09:22] PIMPUp version is current
[2018-Mar-21-14:09:25] PIMP SW updated
[2018-Mar-21-14:57:08] Started PIMPUp v20180215 =======
[2018-Mar-21-14:57:08] PIMPUp version is current
[2018-Mar-21-14:57:11] PIMP SW updated
[2018-Mar-21-14:57:44] Updated default conf files

/bin/dmesg | tail -25

Log of kernel ring messages. This can show some of the things that flash by on boot. Mostly warnings. Also when you plug things into the box like USB drives or network cables, it will show here.

[ 53.389885] i2c-dev: adapter [NVIDIA i2c adapter 8 at e:00.0] registered as minor 75
[ 53.389889] i2c i2c-75: adapter [NVIDIA i2c adapter 8 at e:00.0] registered
[ 53.389925] i2c-dev: adapter [NVIDIA i2c adapter 9 at e:00.0] registered as minor 76
[ 53.389929] i2c i2c-76: adapter [NVIDIA i2c adapter 9 at e:00.0] registered
[ 71.885413] i2c-dev: adapter [NVIDIA i2c adapter 1 at f:00.0] registered as minor 77
[ 71.885426] i2c i2c-77: adapter [NVIDIA i2c adapter 1 at f:00.0] registered
[ 71.885519] i2c-dev: adapter [NVIDIA i2c adapter 2 at f:00.0] registered as minor 78
[ 71.885526] i2c i2c-78: adapter [NVIDIA i2c adapter 2 at f:00.0] registered
[ 71.885587] i2c-dev: adapter [NVIDIA i2c adapter 4 at f:00.0] registered as minor 79
[ 71.885592] i2c i2c-79: adapter [NVIDIA i2c adapter 4 at f:00.0] registered
[ 71.885618] i2c-dev: adapter [NVIDIA i2c adapter 6 at f:00.0] registered as minor 80
[ 71.885622] i2c i2c-80: adapter [NVIDIA i2c adapter 6 at f:00.0] registered
[ 71.885647] i2c-dev: adapter [NVIDIA i2c adapter 7 at f:00.0] registered as minor 81
[ 71.885651] i2c i2c-81: adapter [NVIDIA i2c adapter 7 at f:00.0] registered
[ 71.885673] i2c-dev: adapter [NVIDIA i2c adapter 8 at f:00.0] registered as minor 82
[ 71.885678] i2c i2c-82: adapter [NVIDIA i2c adapter 8 at f:00.0] registered
[ 71.885700] i2c-dev: adapter [NVIDIA i2c adapter 9 at f:00.0] registered as minor 83
[ 71.885704] i2c i2c-83: adapter [NVIDIA i2c adapter 9 at f:00.0] registered
[ 71.965547] nvidia-modeset: Allocated GPU:5 (GPU-22ea0d3a-4b1c-a649-82c7-d00cb0973f9c) @ PCI:0000:09:00.0
[ 72.135986] nvidia-modeset: Allocated GPU:6 (GPU-20214e5a-6daf-6d05-11f8-6715fb141ef0) @ PCI:0000:0a:00.0
[ 72.291865] nvidia-modeset: Allocated GPU:7 (GPU-3ac213df-3bd7-ec8f-2197-ee6b81fb5a5e) @ PCI:0000:0b:00.0
[ 72.558440] nvidia-modeset: Allocated GPU:8 (GPU-34720f6a-a9a3-ee82-48c8-7075e279e4f1) @ PCI:0000:0c:00.0
[ 72.772959] nvidia-modeset: Allocated GPU:9 (GPU-7b9a00eb-9f40-310d-7a81-e09a321fa75c) @ PCI:0000:0d:00.0
[ 72.864202] nvidia-modeset: Allocated GPU:10 (GPU-c914799a-3bf2-e1ba-e4a4-339c406163f5) @ PCI:0000:0e:00.0
[ 72.956678] nvidia-modeset: Allocated GPU:11 (GPU-4c16aafa-8456-b734-0ffa-0e381766f648) @ PCI:0000:0f:00.0

tail -100 /var/log/Xorg.0.lorg

Xorg log. Shows problems with displays, monitors, and GPUs when trying to load the GUI.

https://helpme.getpimp.org/RIG1-1521659809.html