PiMP Troubleshooter


You can troubleshoot your mining rig using this information.



Calling all PiMPs! Farmer 4475 Needs Assistance!
URL: https://miner.farm/farmer/4475/

PiMP Rescue at: 2018-03-28 21:20

PiMP Mining Status

Hardware Summary

View your rig hardware at a glance.

Motherboard: Product Name: H110 Pro BTC+
2-Core CPU:
model name : Intel(R) Celeron(R) CPU G3930 @ 2.90GHz
model name : Intel(R) Celeron(R) CPU G3930 @ 2.90GHz
RAM:
MemTotal: 7846336 kB
MemFree: 4870736 kB
MemAvailable: 5778672 kB
Primary Boot Disk: Device Model: ST3500511CS

AMD GPUs:
GPU0:05.00.0:Radeon RX 570:MS-V34113-F4:SK Hynix H5GC4H24AJR:GDDR5:Polaris10
GPU1:06.00.0:Radeon RX 570:113-D0003400_100:SK Hynix H5GC4H24AJR:GDDR5:Polaris10
GPU2:08.00.0:Radeon RX 570:MS-V34113-F4:SK Hynix H5GC4H24AJR:GDDR5:Polaris10
GPU3:09.00.0:Radeon RX 570:MS-V34113-F4:SK Hynix H5GC4H24AJR:GDDR5:Polaris10
GPU4:0a.00.0:Radeon RX 570:113-V34122-X3:SK Hynix H5GC4H24AJR:GDDR5:Polaris10
GPU5:0b.00.0:Radeon RX 570:113-V34122-X3:SK Hynix H5GC4H24AJR:GDDR5:Polaris10

NVIDIA GPUs:
NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver. Make sure that the latest NVIDIA driver is installed and running.


Software Summary

View your rig software at a glance.

PiMP Image v 2.4.1-all rc30
PIMP Software v20180314
Current Status: Agent: rig1 (Running) Total HR: [150.00Kh/s] Miners running [1] GPUs [AAAAAA]

pimp --list

This shows the current mining profiles loaded in minerfarm with pimp --add, and their status. Note the ID numbers. These are used with commands like pimp --add and pimp --test.

Miners:
ID 1 localhost:4028 ethdcrminer64 claymore.dual.pcfg (Stopped)
ID 2 localhost:4029 nsgminer nsgminer.neo.conf (Stopped)
ID 3 localhost:4030 sgminer sgminer.pascal.conf (Stopped)
ID 4 localhost:4031 ethminer ethminer.amd.pcfg (Running)

pimp --status

This shows the current PiMP Rig Mining status similar to the header in the minerfarm Agent Console.

Agent name: rig1 - IP: 10.0.0.154
Agent service is: Running
Last update: Success
Last message: All good!
Total farm hashrate: 0.15Mh/s

PiMP Configuration

ll /opt/confs

Which confs were modified? The default confs are thoroughly tested by PIMP Testing and Support. We recommend you start with these, verify mining is working, then customize with your own settings and wallets.

total 24
drwxr-xr-x 4 root root 4096 Mar 26 17:39 .
drwxr-xr-x 10 root root 4096 Dec 14 17:16 ..
drwxr-xr-x 3 root root 4096 Mar 18 20:15 backups
lrwxrwxrwx 1 root root 31 Sep 6 2017 bfg.gsd.conf -> /opt/confs/default/bfg.gsd.conf
lrwxrwxrwx 1 root root 32 Sep 6 2017 bfg.zeus.conf -> /opt/confs/default/bfg.zeus.conf
lrwxrwxrwx 1 root root 39 Feb 3 22:24 bminer.equihash.pcfg -> /opt/confs/default/bminer.equihash.pcfg
lrwxrwxrwx 1 root root 36 Feb 21 17:27 ccminer.aeon.pcfg -> /opt/confs/default/ccminer.aeon.pcfg
lrwxrwxrwx 1 root root 36 Feb 21 17:27 ccminer.dash.pcfg -> /opt/confs/default/ccminer.dash.pcfg
lrwxrwxrwx 1 root root 36 Feb 21 17:27 ccminer.lbry.pcfg -> /opt/confs/default/ccminer.lbry.pcfg
lrwxrwxrwx 1 root root 39 Feb 21 17:27 ccminer.lyra2v2.pcfg -> /opt/confs/default/ccminer.lyra2v2.pcfg
lrwxrwxrwx 1 root root 35 Feb 21 17:27 ccminer.neo.pcfg -> /opt/confs/default/ccminer.neo.pcfg
lrwxrwxrwx 1 root root 37 Feb 21 17:27 ccminer.nist5.pcfg -> /opt/confs/default/ccminer.nist5.pcfg
lrwxrwxrwx 1 root root 35 Feb 21 17:27 ccminer.phi.pcfg -> /opt/confs/default/ccminer.phi.pcfg
lrwxrwxrwx 1 root root 37 Feb 21 17:27 ccminer.skein.pcfg -> /opt/confs/default/ccminer.skein.pcfg
lrwxrwxrwx 1 root root 37 Feb 21 17:27 ccminer.skunk.pcfg -> /opt/confs/default/ccminer.skunk.pcfg
lrwxrwxrwx 1 root root 35 Feb 3 22:24 ccminer.xmr.pcfg -> /opt/confs/default/ccminer.xmr.pcfg
lrwxrwxrwx 1 root root 35 Sep 6 2017 cgminer.gsd.conf -> /opt/confs/default/cgminer.gsd.conf
lrwxrwxrwx 1 root root 36 Sep 6 2017 cgminer.zeus.conf -> /opt/confs/default/cgminer.zeus.conf
-rw-r--r-- 1 root root 5990 Mar 25 21:58 claymore.dual.pcfg
lrwxrwxrwx 1 root root 40 Nov 11 14:31 claymore.xmr.amd.pcfg -> /opt/confs/default/claymore.xmr.amd.pcfg
lrwxrwxrwx 1 root root 38 Sep 6 2017 claymore.zcash.pcfg -> /opt/confs/default/claymore.zcash.pcfg
lrwxrwxrwx 1 root root 43 Oct 4 18:09 cpuminer-multi.aeon.pcfg -> /opt/confs/default/cpuminer-multi.aeon.pcfg
lrwxrwxrwx 1 root root 42 Sep 6 2017 cpuminer-multi.xmr.pcfg -> /opt/confs/default/cpuminer-multi.xmr.pcfg
drwxr-xr-x 2 root root 4096 Mar 26 17:39 default
lrwxrwxrwx 1 root root 37 Feb 21 17:27 dstm.equihash.pcfg -> /opt/confs/default/dstm.equihash.pcfg
lrwxrwxrwx 1 root root 36 Feb 21 17:27 ethminer.amd.pcfg -> /opt/confs/default/ethminer.amd.pcfg
lrwxrwxrwx 1 root root 39 Feb 21 17:27 ethminer.nvidia.pcfg -> /opt/confs/default/ethminer.nvidia.pcfg
lrwxrwxrwx 1 root root 34 Feb 21 17:27 ewbf.zcash.pcfg -> /opt/confs/default/ewbf.zcash.pcfg
lrwxrwxrwx 1 root root 39 Sep 6 2017 nheqminer.zcash.pcfg -> /opt/confs/default/nheqminer.zcash.pcfg
lrwxrwxrwx 1 root root 36 Jan 9 21:40 nsgminer.neo.conf -> /opt/confs/default/nsgminer.neo.conf
lrwxrwxrwx 1 root root 46 Feb 3 22:24 nvidia.ccminer.lyra2v2.pcfg -> /opt/confs/default/nvidia.ccminer.lyra2v2.pcfg
lrwxrwxrwx 1 root root 42 Dec 11 00:49 optiminer.equihash.pcfg -> /opt/confs/default/optiminer.equihash.pcfg
lrwxrwxrwx 1 root root 28 Sep 6 2017 README.md -> /opt/confs/default/README.md
lrwxrwxrwx 1 root root 36 Sep 6 2017 sgminer.dash.conf -> /opt/confs/default/sgminer.dash.conf
lrwxrwxrwx 1 root root 35 Sep 6 2017 sgminer.eth.conf -> /opt/confs/default/sgminer.eth.conf
lrwxrwxrwx 1 root root 39 Sep 6 2017 sgminer.groestl.conf -> /opt/confs/default/sgminer.groestl.conf
lrwxrwxrwx 1 root root 36 Sep 6 2017 sgminer.lbry.conf -> /opt/confs/default/sgminer.lbry.conf
lrwxrwxrwx 1 root root 39 Feb 21 17:27 sgminer.lyra2v2.conf -> /opt/confs/default/sgminer.lyra2v2.conf
lrwxrwxrwx 1 root root 37 Jan 6 11:19 sgminer.multi.conf -> /opt/confs/default/sgminer.multi.conf
lrwxrwxrwx 1 root root 38 Sep 6 2017 sgminer.pascal.conf -> /opt/confs/default/sgminer.pascal.conf
lrwxrwxrwx 1 root root 36 Sep 6 2017 sgminer.sigt.conf -> /opt/confs/default/sgminer.sigt.conf
lrwxrwxrwx 1 root root 38 Sep 6 2017 sgminer.x11evo.conf -> /opt/confs/default/sgminer.x11evo.conf
lrwxrwxrwx 1 root root 35 Oct 20 18:22 sgminer.xmr.conf -> /opt/confs/default/sgminer.xmr.conf
lrwxrwxrwx 1 root root 37 Sep 6 2017 sgminer.zcash.conf -> /opt/confs/default/sgminer.zcash.conf

ll /opt/miners

Which miners are compiled? This shows if there were any pimpups done to the miners themselves. May be necessary to pimpup a miner for good performance.

total 84
drwxr-xr-x 19 root root 12288 Dec 11 00:51 bfgminer
drwxr-xr-x 26 root root 4096 Dec 11 00:51 ccminer
drwxr-xr-x 9 root root 4096 Dec 11 00:51 cgminer
drwxr-xr-x 2 root root 4096 Mar 25 23:39 claymore-dual
drwxr-xr-x 2 root root 4096 Mar 18 20:11 claymore-xmr-amd
drwxr-xr-x 2 root root 4096 Mar 18 20:10 claymore-zcash-amd
drwxr-xr-x 13 root root 4096 Dec 11 00:51 cpuminer-multi
drwxr-xr-x 2 root root 4096 Mar 18 20:07 ethminer
drwxr-xr-x 19 root root 4096 Mar 18 20:11 lbrycrd-gpu
drwxr-xr-x 10 root root 4096 Oct 21 11:21 nheqminer
drwxr-xr-x 19 root root 4096 Mar 18 20:12 nsgminer
drwxr-xr-x 2 root root 4096 Dec 10 23:55 nvidia-ewbf-zcash
drwxr-xr-x 8 root root 4096 Mar 18 20:10 optiminer-equihash
drwxr-xr-x 9 root root 4096 Dec 11 00:51 optiminer-zcash
drwxr-xr-x 19 root root 4096 Mar 18 20:13 revolvercoin-sgminer
drwxr-xr-x 19 root root 4096 Mar 18 20:03 sgminer
drwxr-xr-x 19 root root 4096 Mar 18 20:05 sgminer-pascal
drwxr-xr-x 20 root root 4096 Mar 18 20:07 sgminer-tpruvot
drwxr-xr-x 14 root root 4096 Mar 18 20:14 spreadcoinx11-sgminer

ll /opt/bins

Which kernel binary files have been created? This usually means the GPU will mine on that profile. Sometimes after a pimpup of a miner, you will need to run cleanbins command to remove these for good performance.

total 292
-rw-r--r-- 1 root root 298152 Mar 26 17:30 pascalEllesmeregw64l8.bin

cat /root/gpuvars

Which gpuvars were modified? Need to make sure the environment variables needed for mining are intact.

export GPU_MAX_ALLOC_PERCENT=100
export GPU_USE_SYNC_OBJECTS=1
export GPU_MAX_HEAP_SIZE=100
export LANGUAGE=en_US.UTF-8
export LC_ALL=en_US.UTF-8
export PERL_JSON_BACKEND=0
export DISPLAY=:0
export GPU_FORCE_64BIT_PTR=1

cat /root/startup.sh

What startup parameters are you using? This may impact mining performance, fan speeds, and mining starting on boot.

#!/bin/bash
#
# ==================================================================
# .__
#______ |__| _____ ______ Portable Instant Mining Platform
#\____ \| |/ \____ \ PiMP
#| |_> > | Y Y \ |_> >
#| __/|__|__|_| / __/ Support: #PiMP on FreenodeIRC
#|__| \/|__| https://getPiMP.org
#
#
# Copyright (c) 2017 getPiMP.org. All Rights Reserved.
# Author: getPiMP.org
# License: This code is licensed for use with getPiMP.org only.
# Description: This is where you can change user-editable start up options.
# ==================================================================

#####################################################################
# INSTRUCTIONS - PLEASE READ
#####################################################################

# NOTE 1: How to edit this file.
# TO EDIT THIS FILE USE COMMAND: nano /etc/crontab
# IN GUI YOU CAN USE: leafpad /etc/crontab
# (edit command is just for the conf/pcfg!)

# NOTE 2: Absolute Paths
# In this file you have to specify absolute paths.
# Most of the pimp tools are in /opt/pimp.
# Examples: /opt/pimp/pimp --start 1
# /opt/minerfarm/minerfarm --start 1 (same effect)
# To determine what another tool uses for path you can do:
# which [command]
# e.g. which touch would output: /usr/bin/touch

# NOTE 3: This file is called by /etc/crontab upon boot.
# To schedule things on a regular basis (every 12 hours or every Friday at 5 PM),
# You would have to nano /etc/crontab directly.

# NOTE 4:
# If you get "permission denied" run: chmod +x /path/to/executable
# The file must be exectuable. Try running it by hand by typing it in.

# Thank you for reading the instructions.
set -x
#####################################################################
# GPU CONFIG
# Default: 20 seconds after boot, Set the fans to 60% as precaution.
#####################################################################

# Setup the clocks and fans according to what you edited
# Step 1: run this command manually: gputool --config
# it will make you a config file based on your current GPU setup.
#
# Step 2: nano /root/gpu-config.json
# put in what you want.

# Step 3: Run the gputool --config again and it will apply your values.

# Step 4: To have it run on boot, use this command. Timing is optimal
# for most GPUs.

sleep 20 && /opt/pimp/gputool --config

#####################################################################
# START MINING:
# Default: 25 seconds after boot, Start miner with ID 1
#####################################################################

sleep 25 && /opt/pimp/pimp --start 1

# Optional: Start other miners like CPU miner and ASIC
# sleep 30 && /opt/pimp/pimp --start 2
# sleep 35 && /opt/pimp/pimp --start 3

#####################################################################
# DISABLE GPU LEDs: This can save power or turn off lights if you want.
# OBVIOUSLY THIS IS FOR NVIDIA ONLY! NOT AMD.
# GPULogoBrightness can take a value from 0 to 100, this affects the
# brightness of the backlight.
# 0 - completely off, 100 - maximum brightness.
# Default: disabled, just remove the # to enable.
# If no GPU specified (like default) it will assign to all GPUs in the rig.
#####################################################################

#/usr/bin/nvidia-settings --assign GPULogoBrightness=0

#####################################################################
# USB LCD Displays
# Start the LCD display service. Optional, for USB LCD display support.
# These are for any "USB LCD device" commonly used with Raspi
# Example: https://www.adafruit.com/product/782
# The default will cycle through CPU Load, network, etc.
#####################################################################
# sleep 10 && systemctl LCDd start && sleep 10 && lcdproc

cat /root/gpu-config.json

What are the current fan/clock settings?

{
"comment": "Please see https://getpimp.org for information about configuring this file",
"gpuSettings": [
{
"gpu_id": "0",
"fanspeed": "90",
"temptarget": "70"
},
{
"gpu_id": "1",
"AMDCoreClk": "1400",
"AMDMemClk": "2000",
"AMDPtune": "7",
"fanspeed": "90",
"temptarget": "70"
},
{
"gpu_id": "2",
"AMDCoreClk": "1400",
"AMDMemClk": "2000",
"AMDPtune": "7",
"fanspeed": "90",
"temptarget": "70"
},
{
"gpu_id": "3",
"AMDCoreClk": "1400",
"AMDMemClk": "2000",
"AMDPtune": "7",
"fanspeed": "90",
"temptarget": "70"
},
{
"gpu_id": "4",
"AMDCoreClk": "1400",
"AMDMemClk": "2000",
"AMDPtune": "7",
"fanspeed": "90",
"temptarget": "70"
},
{
"gpu_id": "5",
"AMDCoreClk": "1400",
"AMDMemClk": "2000",
"AMDPtune": "7",
"fanspeed": "90",
"temptarget": "70"
},
{
"gpu_id": "6",
"AMDCoreClk": "1400",
"AMDMemClk": "2000",
"AMDPtune": "7",
"fanspeed": "90",
"temptarget": "70"
}
]
}

PiMP Software and Services

ll /opt/pimp

What do the pimp software files look like?

total 5616
drwxr-xr-x 2 root root 4096 Nov 16 20:42 amdmeminfo
-rwxr-xr-x 1 root root 1540944 Oct 10 18:36 atiflash
-rwxr-xr-x 1 pimp pimp 59110 Mar 18 20:01 bootdetect
drwxr-xr-x 5 root root 4096 Dec 12 12:30 go
-rwxr-xr-x 1 root root 307544 Mar 18 20:01 gputool
-rwxr-xr-x 1 root root 120900 Mar 18 20:01 helpme
-rw-r--r-- 1 root root 3690 Mar 18 20:01 newpimp.txt
-rwxr-xr-x 1 root root 2879912 Oct 21 14:06 nvflash
drwxr-xr-x 2 root root 4096 Sep 6 2017 ohgodatool
-rwxr-xr-x 1 root root 403669 Mar 18 20:01 pimp
-rwxr-xr-x 1 root root 117238 Mar 18 20:01 pimpkey
-rw-r--r-- 1 root root 14223 Mar 18 20:01 pimpminers.conf
-rwxr-xr-x 1 root root 263435 Feb 21 17:27 pimpup
drwxr-xr-x 3 root root 4096 Dec 13 19:31 PolarisBiosEditor

ll /opt/minerfarm

What do the minerfarm software files look like?

total 1096
drwxr-xr-x 2 root root 4096 Sep 6 2017 lib
-rwxr-xr-x 1 root root 569299 Mar 18 20:01 minerfarm
-rwxr-xr-x 1 pimp pimp 541615 Mar 18 20:01 minerfarm_svc
-rw-r--r-- 1 root root 2809 Jul 28 2017 profiles.txt

cat /etc/crontab

What cron entries were modified? Just checking what you have on startup and if you are properly calling /root/startup.sh.

# /etc/crontab: system-wide crontab
# Unlike any other crontab you don't have to run the `crontab'
# command to install the new version when you edit this file
# and files in /etc/cron.d. These files also have username fields,
# that none of the other crontabs do.

SHELL=/bin/sh
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin

#####################################################################
# HOW TO SCHEDULE JOBS IN CRONTAB:
#####################################################################

# +---------------- minute (0 - 59)
# | +------------- hour (0 - 23)
# | | +---------- day of month (1 - 31)
# | | | +------- month (1 - 12)
# | | | | +---- day of week (0 - 6) (Sunday=0)
# | | | | |
# * * * * * command to be executed

# In other words:
# 1. Minute when the process will be started [0-60]
# 2. Hour when the process will be started [0-23]
# 3. Day of the month when the process will be started [1-28/29/30/31]
# 4. Month of the year when the process will be started [1-12]
# 5. Weekday when the process will be started [0-6] [0 is Sunday]

# FOR INTERVALS:
# Use the division bar (slash) to divide it up.
# all x min = */x
# example: 0/15 in minute column would be every 15 minutes.

# 5 8 * * 0 will run the job every sunday at 8:05 am.

# For more information and a neat calculator, see https://crontab.guru/

#####################################################################
# USER EDITABLE SETTINGS
# Use: nano /root/startup.sh to change your boot settings.
#
#####################################################################

# COMMANDS RUN ON BOOT UP:
# To run scripts on reboot, use: @reboot root /path/to/executable
# If you get "permission denied" run: chmod +x /path/to/executable
# It is best to edit the on-boot stuff with: nano /root/startup.sh

@reboot root /root/startup.sh

# COMMANDS RUN ON A SCHEDULE:

# Reboot automatically every 6 or 12 hours:
# 0 /6 * * * sync && echo b > /proc/sysrq-trigger
# 0 /12 * * * sync && echo b > /proc/sysrq-trigger

# This will reboot at 1 AM Zulu (Rig local time):
# 0 1 * * * sync && echo b > /proc/sysrq-trigger



#####################################################################
# DO NOT EDIT BELOW THIS LINE
#####################################################################
# m h dom mon dow user command
17 * * * * root cd / && run-parts --report /etc/cron.hourly
25 6 * * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily )
47 6 * * 7 root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.weekly )
52 6 1 * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.monthly )

minerfarm service

(( Is minerfarm agent service running? If it is not running, try: systemctl start minerfarm, or minerfarm and then use 'o' to start.))
● minerfarm.service - Service process for miner.farm agent
Loaded: loaded (/etc/systemd/system/minerfarm.service; enabled; vendor preset: enabled)
Active: active (running) since Sun 2018-03-25 22:02:44 EDT; 2 days ago
Process: 856 ExecStart=/opt/minerfarm/minerfarm_svc (code=exited, status=0/SUCCESS)
Main PID: 994 (minerfarm_svc)
CGroup: /system.slice/minerfarm.service
└─994 /usr/bin/perl /opt/minerfarm/minerfarm_svc

Mar 25 22:02:40 pimp2 systemd[1]: Starting Service process for miner.farm agent...
Mar 25 22:02:44 pimp2 systemd[1]: Started Service process for miner.farm agent.

pimp vnc service

Is the remote vnc desktop service running? If not, RDP and VNC will not work.

● pimpvnc.service - PiMP VNC Service
Loaded: loaded (/etc/systemd/user/pimpvnc.service; enabled; vendor preset: enabled)
Active: active (running) since Sun 2018-03-25 22:02:47 EDT; 2 days ago
Main PID: 1042 (x11vnc)
CGroup: /user.slice/user-0.slice/user@0.service/pimpvnc.service
└─1042 /usr/bin/x11vnc -v -display :0 -auth .Xauthority -nopw -logappend /var/log/pimpvnc.log

Mar 25 22:02:47 pimp2 systemd[1033]: Started PiMP VNC Service.
Mar 25 22:02:47 pimp2 x11vnc[1042]: PORT=5900

lightdm service

Is the desktop GUI service running? If this is not running you will not get GUI/RDP/VNC access, and may not

● lightdm.service - Light Display Manager
Loaded: loaded (/lib/systemd/system/lightdm.service; enabled; vendor preset: enabled)
Active: active (running) since Sun 2018-03-25 22:02:41 EDT; 2 days ago
Docs: man:lightdm(1)
Process: 838 ExecStartPre=/bin/sh -c [ "$(basename $(cat /etc/X11/default-display-manager 2>/dev/null))" = "lightdm" ] (code=exited, status=0/SUCCESS)
Main PID: 846 (lightdm)
CGroup: /system.slice/lightdm.service
├─846 /usr/sbin/lightdm
└─870 /usr/lib/xorg/Xorg -core :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch

Mar 25 22:02:40 pimp2 systemd[1]: Starting Light Display Manager...
Mar 25 22:02:41 pimp2 systemd[1]: Started Light Display Manager.
Mar 25 22:02:46 pimp2 lightdm[1023]: pam_unix(lightdm-autologin:session): session opened for user root by (uid=0)

GPU Info

lspci -v | grep VGA

What GPUs are seen by the PCI subsystem? This is Linux physically detecting the GPUs.

00:02.0 VGA compatible controller: Intel Corporation HD Graphics 610 (rev 04) (prog-if 00 [VGA controller])
05:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/580] (rev ef) (prog-if 00 [VGA controller])
06:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/580] (rev ef) (prog-if 00 [VGA controller])
08:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/580] (rev ef) (prog-if 00 [VGA controller])
09:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/580] (rev ef) (prog-if 00 [VGA controller])
0a:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/580] (rev ef) (prog-if 00 [VGA controller])
0b:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/580] (rev ef) (prog-if 00 [VGA controller])

gputool --status

What GPUs are seen by the PIMP GPUTOOL SYSFS subsystem? AMDGPU cards only.

PIMP GPU Tool v20180220
GPUs type: Mixed

WARNING: Intel GPUs are not currently supported for mining
NOTE: At least one miner appears to be running.
GPU 1: AMD Radeon RX 570, Temp: 46C, Fan: 88%, Core Clock: 1400 Mhz, Memory Clock: 2000 Mhz, Power profile: performance (DPM mode), Power Usage: 63.1 W
GPU 2: AMD Radeon RX 570, Temp: unknown, Fan: unknown, Core Clock: unknown, Memory Clock: unknown,
GPU 3: AMD Radeon RX 570, Temp: unknown, Fan: unknown, Core Clock: 1400 Mhz, Memory Clock: 2000 Mhz, Power profile: performance (DPM mode), Power Usage: 88.147 W
GPU 4: AMD Radeon RX 570, Temp: unknown, Fan: unknown, Core Clock: 1400 Mhz, Memory Clock: 2000 Mhz, Power profile: performance (DPM mode), Power Usage: 66.14 W
GPU 5: AMD Radeon RX 570, Temp: unknown, Fan: unknown, Core Clock: 1400 Mhz, Memory Clock: 2000 Mhz, Power profile: performance (DPM mode), Power Usage: 67.178 W
GPU 6: AMD Radeon RX 570, Temp: unknown, Fan: unknown, Core Clock: 1400 Mhz, Memory Clock: 2000 Mhz, Power profile: performance (DPM mode), Power Usage: 121.184 W

/opt/pimp/atiflash -ai

Is atiflash seeing the GPUs? FGLRX/AMDGPU cards only.

amdmeminfo

Is amdmeminfo seeing the GPUs? FGLRX/AMDGPU cards only.

AMDMemInfo by Zuikkis
Updated by Yann St.Arnaud
-----------------------------------
Found Card: 1002:67df rev ef (AMD Radeon RX 570)
Chip Type: Polaris10
BIOS Version: MS-V34113-F4
PCI: 08:00.0
OpenCL ID: 2
Subvendor: 0x1462
Subdevice: 0x3416
Sysfs Path: /sys/bus/pci/devices/0000:08:00.0
Memory Configuration: 0x506066f2
Memory Type: GDDR5
Memory Model: SK Hynix H5GC4H24AJR
-----------------------------------
Found Card: 1002:67df rev ef (AMD Radeon RX 570)
Chip Type: Polaris10
BIOS Version: MS-V34113-F4
PCI: 09:00.0
OpenCL ID: 3
Subvendor: 0x1462
Subdevice: 0x3416
Sysfs Path: /sys/bus/pci/devices/0000:09:00.0
Memory Configuration: 0x506066f2
Memory Type: GDDR5
Memory Model: SK Hynix H5GC4H24AJR
-----------------------------------
Found Card: 1002:67df rev ef (AMD Radeon RX 570)
Chip Type: Polaris10
BIOS Version: MS-V34113-F4
PCI: 05:00.0
OpenCL ID: 0
Subvendor: 0x1462
Subdevice: 0x3416
Sysfs Path: /sys/bus/pci/devices/0000:05:00.0
Memory Configuration: 0x506066f2
Memory Type: GDDR5
Memory Model: SK Hynix H5GC4H24AJR
-----------------------------------
Found Card: 1002:67df rev ef (AMD Radeon RX 570)
Chip Type: Polaris10
BIOS Version: 113-V34122-X3
PCI: 0a:00.0
OpenCL ID: 4
Subvendor: 0x1462
Subdevice: 0x341b
Sysfs Path: /sys/bus/pci/devices/0000:0a:00.0
Memory Configuration: 0x506066f2
Memory Type: GDDR5
Memory Model: SK Hynix H5GC4H24AJR
-----------------------------------
Found Card: 1002:67df rev ef (AMD Radeon RX 570)
Chip Type: Polaris10
BIOS Version: 113-D0003400_100
PCI: 06:00.0
OpenCL ID: 1
Subvendor: 0x148c
Subdevice: 0x2379
Sysfs Path: /sys/bus/pci/devices/0000:06:00.0
Memory Configuration: 0x506066f2
Memory Type: GDDR5
Memory Model: SK Hynix H5GC4H24AJR
-----------------------------------
Found Card: 1002:67df rev ef (AMD Radeon RX 570)
Chip Type: Polaris10
BIOS Version: 113-V34122-X3
PCI: 0b:00.0
OpenCL ID: 5
Subvendor: 0x1462
Subdevice: 0x341b
Sysfs Path: /sys/bus/pci/devices/0000:0b:00.0
Memory Configuration: 0x506066f2
Memory Type: GDDR5
Memory Model: SK Hynix H5GC4H24AJR

***** /opt/miners/sgminer/sgminer -n *****

Is sgminer seeing the GPUs? Very important. If sgminer sees your GPUs, then mining should work with the default profiles. Most likely if your GPUs are seen here but mining is not working, it is a conf error, network or pool issue.. Try default conf with del command, or use pimp --debug 1 to look at the miner screen directly in the debug mode to get more information.

[17:20:47] CL Platform vendor: Advanced Micro Devices, Inc.
[17:20:47] CL Platform name: AMD Accelerated Parallel Processing
[17:20:47] CL Platform version: OpenCL 2.0 AMD-APP (2482.3)
[17:20:47] Platform devices: 6
[17:20:47] 0 Ellesmere
[17:20:47] 1 Ellesmere
[17:20:47] 2 Ellesmere
[17:20:47] 3 Ellesmere
[17:20:47] 4 Ellesmere
[17:20:47] 5 Ellesmere
[17:20:47] 6 GPU devices max detected

/opt/miners/optiminer-zcash/optiminer-zcash --list-devices

Is optiminer seeing the GPUs? AMDGPU/FGLRX only, same basic thoughts as sgminer above.

[2018-03-28 17:20:48.037] [info] Optiminer/Zcash 1.7.0 (C) Optiminer 2017
Platform (-c) 0, Device (-d) 0:
Platform Vendor: AMD
Device Name: Ellesmere
Driver Version: 2482.3
Address bits: 64
Available memory: 1578516480
GCN Support: Gen 4
Has device specific faster kernel: Yes
Platform (-c) 0, Device (-d) 1:
Platform Vendor: AMD
Device Name: Ellesmere
Driver Version: 2482.3
Address bits: 64
Available memory: 1578516480
GCN Support: Gen 4
Has device specific faster kernel: Yes
Platform (-c) 0, Device (-d) 2:
Platform Vendor: AMD
Device Name: Ellesmere
Driver Version: 2482.3
Address bits: 64
Available memory: 1578516480
GCN Support: Gen 4
Has device specific faster kernel: Yes
Platform (-c) 0, Device (-d) 3:
Platform Vendor: AMD
Device Name: Ellesmere
Driver Version: 2482.3
Address bits: 64
Available memory: 1578516480
GCN Support: Gen 4
Has device specific faster kernel: Yes
Platform (-c) 0, Device (-d) 4:
Platform Vendor: AMD
Device Name: Ellesmere
Driver Version: 2482.3
Address bits: 64
Available memory: 1578516480
GCN Support: Gen 4
Has device specific faster kernel: Yes
Platform (-c) 0, Device (-d) 5:
Platform Vendor: AMD
Device Name: Ellesmere
Driver Version: 2482.3
Address bits: 64
Available memory: 1578516480
GCN Support: Gen 4
Has device specific faster kernel: Yes

nvidia-smi

Is nvidia-smi seeing the GPUs? This is the main overclocking and admin tool for NVIDIA GPUs. If this looks good it is highly likely you will successfully mine.

NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver. Make sure that the latest NVIDIA driver is installed and running.

nVidia Power use

What kind of power are the nVidia GPUs drawing?

NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver. Make sure that the latest NVIDIA driver is installed and running.

xrandr -q

What information does Xorg have?

Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192
HDMI-3 disconnected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
DP-3 disconnected (normal left inverted right x axis y axis)
1920x1080 (0x146) 148.500MHz +HSync +VSync
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 67.50KHz
v: height 1080 start 1084 end 1089 total 1125 clock 60.00Hz

Hardware Info

Disk SMART Data for /dev/sda

What is the status of the boot disk? Errors or Reallocated Sectors means the disk should be replaced immediately.

smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.15.0-rc2-pimp-celery+] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model: ST3500511CS
Serial Number: 5VVS7H49
LU WWN Device Id: 5 000c50 07bed8a7f
Firmware Version: CA14
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5900 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed Mar 28 17:20:48 2018 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 633) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 117) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 118 100 006 Pre-fail Always - 198192475
3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 160
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 071 060 030 Pre-fail Always - 4308393233
9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 2310
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 79
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 068 062 045 Old_age Always - 32 (Min/Max 26/35)
194 Temperature_Celsius 0x0022 032 040 000 Old_age Always - 32 (0 14 0 0 0)
195 Hardware_ECC_Recovered 0x001a 046 045 000 Old_age Always - 198192475
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Chassis Temps

How are the system temperatures?

amdgpu-pci-0a00
Adapter: PCI adapter
fan1: 3989 RPM
temp1: +52.0°C (crit = +0.0°C, hyst = +0.0°C)

amdgpu-pci-0800
Adapter: PCI adapter
fan1: 2969 RPM
temp1: +53.0°C (crit = +0.0°C, hyst = +0.0°C)

amdgpu-pci-0500
Adapter: PCI adapter
fan1: 2401 RPM
temp1: +47.0°C (crit = +0.0°C, hyst = +0.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +30.0°C (high = +80.0°C, crit = +100.0°C)
Core 0: +29.0°C (high = +80.0°C, crit = +100.0°C)
Core 1: +29.0°C (high = +80.0°C, crit = +100.0°C)

amdgpu-pci-0b00
Adapter: PCI adapter
fan1: 4033 RPM
temp1: +56.0°C (crit = +0.0°C, hyst = +0.0°C)

amdgpu-pci-0900
Adapter: PCI adapter
fan1: 2808 RPM
temp1: +52.0°C (crit = +0.0°C, hyst = +0.0°C)

amdgpu-pci-0600
Adapter: PCI adapter
fan1: 2611 RPM
temp1: +60.0°C (crit = +0.0°C, hyst = +0.0°C)

pch_skylake-virtual-0
Adapter: Virtual device
temp1: +40.0°C

Logs

tail -50 /var/log/agent.log

Log for minerfarm agent.

tail -50 /var/log/miner.log

Pimp unified miner logging of the miner instances.

2018-03-28 21:10:38 : ID 4, Elapsed 170941, MHS 5s 0.152252, Accepted 6570, Rejected 0
2018-03-28 21:10:50 : ID 4, Elapsed 170941, MHS 5s 0.152657, Accepted 6570, Rejected 0
2018-03-28 21:11:01 : ID 4, Elapsed 170941, MHS 5s 0.152552, Accepted 6570, Rejected 0
2018-03-28 21:11:13 : ID 4, Elapsed 171001, MHS 5s 0.152066, Accepted 6570, Rejected 0
2018-03-28 21:11:28 : ID 4, Elapsed 171001, MHS 5s 0.151803, Accepted 6570, Rejected 0
2018-03-28 21:11:39 : ID 4, Elapsed 171001, MHS 5s 0.151987, Accepted 6571, Rejected 0
2018-03-28 21:11:51 : ID 4, Elapsed 171001, MHS 5s 0.152023, Accepted 6571, Rejected 0
2018-03-28 21:12:03 : ID 4, Elapsed 171001, MHS 5s 0.152517, Accepted 6571, Rejected 0
2018-03-28 21:12:16 : ID 4, Elapsed 171061, MHS 5s 0.15228, Accepted 6572, Rejected 0
2018-03-28 21:12:28 : ID 4, Elapsed 171061, MHS 5s 0.152269, Accepted 6572, Rejected 0
2018-03-28 21:12:40 : ID 4, Elapsed 171061, MHS 5s 0.152495, Accepted 6572, Rejected 0
2018-03-28 21:12:53 : ID 4, Elapsed 171061, MHS 5s 0.152294, Accepted 6572, Rejected 0
2018-03-28 21:13:05 : ID 4, Elapsed 171061, MHS 5s 0.15212, Accepted 6572, Rejected 0
2018-03-28 21:13:17 : ID 4, Elapsed 171121, MHS 5s 0.152358, Accepted 6572, Rejected 0
2018-03-28 21:13:29 : ID 4, Elapsed 171121, MHS 5s 0.152206, Accepted 6573, Rejected 0
2018-03-28 21:13:42 : ID 4, Elapsed 171121, MHS 5s 0.15213, Accepted 6574, Rejected 0
2018-03-28 21:13:54 : ID 4, Elapsed 171121, MHS 5s 0.151883, Accepted 6574, Rejected 0
2018-03-28 21:14:06 : ID 4, Elapsed 171121, MHS 5s 0.152425, Accepted 6574, Rejected 0
2018-03-28 21:14:19 : ID 4, Elapsed 171181, MHS 5s 0.15228, Accepted 6575, Rejected 0
2018-03-28 21:14:31 : ID 4, Elapsed 171181, MHS 5s 0.152457, Accepted 6575, Rejected 0
2018-03-28 21:14:46 : ID 4, Elapsed 171181, MHS 5s 0.152021, Accepted 6575, Rejected 0
2018-03-28 21:14:58 : ID 4, Elapsed 171181, MHS 5s 0.15232, Accepted 6577, Rejected 0
2018-03-28 21:15:10 : ID 4, Elapsed 171181, MHS 5s 0.15232, Accepted 6577, Rejected 0
2018-03-28 21:15:22 : ID 4, Elapsed 171241, MHS 5s 0.152391, Accepted 6577, Rejected 0
2018-03-28 21:15:34 : ID 4, Elapsed 171241, MHS 5s 0.152365, Accepted 6578, Rejected 0
2018-03-28 21:15:49 : ID 4, Elapsed 171241, MHS 5s 0.152407, Accepted 6579, Rejected 0
2018-03-28 21:16:01 : ID 4, Elapsed 171241, MHS 5s 0.15232, Accepted 6579, Rejected 0
2018-03-28 21:16:13 : ID 4, Elapsed 171301, MHS 5s 0.152368, Accepted 6580, Rejected 0
2018-03-28 21:16:25 : ID 4, Elapsed 171301, MHS 5s 0.152582, Accepted 6580, Rejected 0
2018-03-28 21:16:37 : ID 4, Elapsed 171301, MHS 5s 0.15245, Accepted 6581, Rejected 0
2018-03-28 21:16:52 : ID 4, Elapsed 171301, MHS 5s 0.152207, Accepted 6581, Rejected 0
2018-03-28 21:17:04 : ID 4, Elapsed 171301, MHS 5s 0.152331, Accepted 6581, Rejected 0
2018-03-28 21:17:16 : ID 4, Elapsed 171361, MHS 5s 0.152437, Accepted 6581, Rejected 0
2018-03-28 21:17:28 : ID 4, Elapsed 171361, MHS 5s 0.152517, Accepted 6581, Rejected 0
2018-03-28 21:17:40 : ID 4, Elapsed 171361, MHS 5s 0.152107, Accepted 6582, Rejected 0
2018-03-28 21:17:55 : ID 4, Elapsed 171361, MHS 5s 0.152035, Accepted 6585, Rejected 0
2018-03-28 21:18:06 : ID 4, Elapsed 171361, MHS 5s 0.152457, Accepted 6585, Rejected 0
2018-03-28 21:18:18 : ID 4, Elapsed 171421, MHS 5s 0.152287, Accepted 6585, Rejected 0
2018-03-28 21:18:30 : ID 4, Elapsed 171421, MHS 5s 0.152482, Accepted 6586, Rejected 0
2018-03-28 21:18:42 : ID 4, Elapsed 171421, MHS 5s 0.152569, Accepted 6586, Rejected 0
2018-03-28 21:18:55 : ID 4, Elapsed 171421, MHS 5s 0.152282, Accepted 6586, Rejected 0
2018-03-28 21:19:09 : ID 4, Elapsed 171421, MHS 5s 0.152557, Accepted 6586, Rejected 0
2018-03-28 21:19:21 : ID 4, Elapsed 171481, MHS 5s 0.152369, Accepted 6586, Rejected 0
2018-03-28 21:19:33 : ID 4, Elapsed 171481, MHS 5s 0.152395, Accepted 6587, Rejected 0
2018-03-28 21:19:46 : ID 4, Elapsed 171481, MHS 5s 0.152356, Accepted 6587, Rejected 0
2018-03-28 21:19:58 : ID 4, Elapsed 171481, MHS 5s 0.152294, Accepted 6588, Rejected 0
2018-03-28 21:20:11 : ID 4, Elapsed 171481, MHS 5s 0.152287, Accepted 6589, Rejected 0
2018-03-28 21:20:23 : ID 4, Elapsed 171541, MHS 5s 0.152222, Accepted 6589, Rejected 0
2018-03-28 21:20:36 : ID 4, Elapsed 171541, MHS 5s 0.152469, Accepted 6590, Rejected 0
2018-03-28 21:20:48 : ID 4, Elapsed 171541, MHS 5s 0.126371, Accepted 6590, Rejected 0

tail -20 /var/log/pimpup.log

Log of pimpup updates.

[2018-Mar-18-20:09:59] PIMPUp version is current
[2018-Mar-18-20:10:00] PIMP SW version is current
[2018-Mar-18-20:10:14] Updated default conf files
[2018-Mar-18-20:10:27] Started update for 151
[2018-Mar-18-20:10:47] Update succeeded for 151
[2018-Mar-18-20:10:51] Started update for 160
[2018-Mar-18-20:10:52] Update succeeded for 160
[2018-Mar-18-20:10:55] Started update for 165
[2018-Mar-18-20:10:56] Update succeeded for 165
[2018-Mar-18-20:11:01] Started update for 170
[2018-Mar-18-20:11:02] Update succeeded for 170
[2018-Mar-18-20:11:08] Started update for 180
[2018-Mar-18-20:11:55] Update succeeded for 180
[2018-Mar-18-20:11:59] Started update for 185
[2018-Mar-18-20:12:46] Update succeeded for 185
[2018-Mar-18-20:12:51] Started update for 190
[2018-Mar-18-20:13:37] Update succeeded for 190
[2018-Mar-18-20:13:59] Started update for 195
[2018-Mar-18-20:14:40] Update succeeded for 195
[2018-Mar-18-20:14:49] Build backup folders and logs deleted

/bin/dmesg | tail -25

Log of kernel ring messages. This can show some of the things that flash by on boot. Mostly warnings. Also when you plug things into the box like USB drives or network cables, it will show here.

[242320.905899] RAX: 00000000ffffffff RBX: ffff90dd87d09000 RCX: ffff90dd864f5a00
[242320.905900] RDX: ffff90dd47b08e60 RSI: 0000037913cd8537 RDI: ffff90dd864f5880
[242320.905901] RBP: ffff90dd9dd1b640 R08: 00000000188c6801 R09: 000000018010000d
[242320.905902] R10: ffff9f0d01737dc0 R11: 0000000000000700 R12: ffff90ddd5856fcc
[242320.905903] R13: 0000000000000000 R14: 0ffff90dd9dd1f50 R15: ffff90dd458cd6c0
[242320.905904] FS: 0000000000000000(0000) GS:ffff90dd9dd00000(0000) knlGS:0000000000000000
[242320.905905] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[242320.905906] CR2: ffff90ddd5856fcc CR3: 0000000191e09002 CR4: 00000000003606e0
[242320.905907] Call Trace:
[242320.905936] amdgpu_job_free_cb+0x2b/0x80 [amdgpu]
[242320.905940] process_one_work+0x154/0x3e0
[242320.905942] worker_thread+0x4a/0x440
[242320.905944] kthread+0xf5/0x130
[242320.905945] ? process_one_work+0x3e0/0x3e0
[242320.905947] ? kthread_associate_blkcg+0x90/0x90
[242320.905949] ? do_group_exit+0x3a/0xa0
[242320.905951] ret_from_fork+0x1f/0x30
[242320.905952] Code: 44 00 00 48 8b 47 08 48 83 b8 f0 00 00 00 00 0f 84 86 00 00 00 48 63 c6 41 55 41 54 4c 8d a4 87 70 02 00 00 55 b8 ff ff ff ff 53 41 0f c1 04 24 83 e8 01 85 c0 7f 5d 83 fe 01 74 58 4c 8d af
[242320.905989] RIP: amdgpu_ring_priority_put+0x2d/0xc0 [amdgpu] RSP: ffff9f0d01737e48
[242320.905990] CR2: ffff90ddd5856fcc
[242320.905991] ---[ end trace 6bef73b4fd5269a7 ]---
[242321.063561] i2c i2c-9: master_xfer[0] W, addr=0x50, len=1
[242321.063565] i2c i2c-9: master_xfer[1] R, addr=0x50, len=1
[242321.066765] i2c i2c-9: master_xfer[0] W, addr=0x40, len=1
[242321.066768] i2c i2c-9: master_xfer[1] R, addr=0x40, len=16

tail -100 /var/log/Xorg.0.lorg

Xorg log. Shows problems with displays, monitors, and GPUs when trying to load the GUI.

https://helpme.getpimp.org/rig1-1522272048.html